An Interior Door trim tool such as ( Lisle 3 piece body trim tool set 00947320000 | Model# 35440) ) that can be picked up at SEARS for about 25 bucks. Will make the disassembly a lot easier. Make sure to pick up the door clips that can be located at Autozone, Checker Auto Ect... | Sears Item# 00947320000 | Model# 35440)
You have to remove the inside door panel to get access to the door handle nuts.
First disconnect the battery, remove the door panel and pretty straight forward from there.
behind kick panel on the passenger side next to the door
Open the drivers door and look at the lower dash and you will see a panel that can be removed and that is where you will find the fuse.
in the panel located on side of dashboard open drivers door to see it
The 1982 Lincoln front door panel is held in place with four retaining bolts and 12 retaining clips. Remove the retaining bolts and pry outward on each retaining clip.
Driver's side, door open, side of the dash, small panel.
When you open the drivers' door and you look to the left of the dashboard you will see a small panel that has to be popped out, that is where the fuse is.
The lock is behind the Lincoln emblem on the trunk. Or press the lockable trunk release button on the inside driver door panel.
In a 2002 Lincoln LS : The fuel pump shut off switch ( inertia switch ) is in the drivers foot well , behind the kick panel ( there is an access hole ) * the kick panel is the interior trim panel , in front of the front door , beside the drivers left foot
passenger side rocker arm panel
THERE IS ONE SCREW BEHIND THE DOOR LIGHT. LIFT THE WINDOW CONTROL PANEL ON ARM REST AND REMOVE BOLT BEHIND IT. REMOVE PLASTIC COVER BEHIND INNER DOOR HANDLE. THEN LIFT THE PANEL UP. DO NOT PRY OR YOU WILL BREAK ALL OF THE PLASTIC SUPPORTS, YOU MUST LIFT IT UP.