answersLogoWhite

0

Double buret clamp

User Avatar

Anonymous

16y ago
Updated: 11/10/2020

This device is used to support two burettes.

User Avatar

Wiki User

8y ago

What else can I help you with?

Related Questions

Definition of double buret clamp?

A double buret clamp is used in laboratories. The function of the clamp is to hold burets, flasks, or test tubes steady in an upright position.


What is the use of a buret clamp?

to clamp the buret


What is a buret clamp?

A buret clamp is a chemistry laboratory support device, to affix and hold steady another piece of equipment (a glass column called a buret) which will be reacted with chemicals. The clamp has holding jaws, which are curved to firmly grasp the column in two portions of its long axis. It also has an attachment, by which it grasps the support post. The clamp is a piece of hardware which makes a retaining bridge between the ground support post, and the chemically reactive vessel. There are several basic designs and makes of buret clamps, which serve to accomodate the choices and work detail, of the chemist.


What is a burette clamp and how is it used?

It's used for clamping a buret, of course. I can actually think of three distinct pieces of equipment that could reasonably be called a "buret clamp", and I'm not certain which of them you mean. One of them is a pinch clamp used to clamp the outflow tube (a rubber or plastic tube from the bottom of certain types of burets). Another one is sometimes called a tube clamp, and is a piece of hardware used to secure a glass tube of some kind (such as a buret, but also a test tube or parts of a vacuum manifold) to a metal stand or framework. Finally, there's a specialized spring-loaded piece of hardware used specifically for burets, which holds and supports them in two places on the tube (the tube clamp clamps onto the buret in a single location on the tube).


Holds the clamp to the retort stand?

A test tube or buret clamp is used to secure glassware to a retort stand. It typically consists of a spring-loaded clamp attached to a flexible arm that can be adjusted to hold the glassware securely in place. This setup is commonly used in laboratories to hold various types of glassware during experiments or reactions.


Use of ring clamp in lab?

It's been a lot of years since I worked in a lab, but if my memory serves me correctly, a pinch clamp is used on tubing to control the flow of a liquid through the tubing.j3h.


How can I install a cable clamp properly?

To install a cable clamp properly, first identify the appropriate size for your cable. Place the clamp around the cable and secure it in place using a screwdriver or wrench. Make sure the clamp is tight enough to hold the cable securely in place without damaging it. Double-check the installation to ensure the cable is properly secured and the clamp is not too tight.


What are the uses of adjustable stand?

This device is most commonly used to determine the concentration of a known solute in ... a light source (often an ordinary low-voltage filament lamp); anadjustable ... Beaker clamp; Clamp holder; Concentric ring tripod; Double burette clamp ...


How do you make a double bar clamp?

you don't have to make them. you buy them from eBay boarderline or from some other places.


How can I securely attach a clamp-on bicycle mirror to my bike?

To securely attach a clamp-on bicycle mirror to your bike, follow these steps: Identify the appropriate location on your handlebars for the mirror. Loosen the clamp on the mirror and position it on the handlebars. Tighten the clamp securely using the provided tools. Adjust the mirror to your desired angle for optimal visibility. Double-check the tightness of the clamp before riding to ensure the mirror stays in place.


When clamping the tube in the clamp to fabricate a double flare the tubing should?

When clamping the tube to fabricate a double flare, the tubing should be securely held in the clamp with the end of the tube extending slightly beyond the clamp jaws. This ensures that the flare can be formed properly without any obstructions. Additionally, the tube should be positioned straight and aligned to prevent any irregularities in the flare. Proper alignment and secure clamping are crucial for achieving a clean and effective double flare.


Can razor pro clamps fit onto grit alloy bars?

No i dont think so. I have a razor double clamp an i tried to fit it on my grit alloy bars i had to force it and it still dont force in. I had to buy a brand new clamp