The process in which electric current is produced when a spinning shaft rotates magnets inside a generator is referred to as 'Direct Current'. It is not expected to work by the normal standard physics model however some people claim it is just.
emf produced by generator(E)=no. of turns in coil*rate of change of magnetic flux
The rotor turns (rotates) causing magnetic fields to move across a coil of wire. This induces an electrical current in the wires of the coil.
Armature reaction is the interaction between the magnetic flux produced by armature current and that of the main magnetic field in an electric motor or generator.
It is a conductor, it conducts the electric current generated to the load that is being supplied with power.
Power = E I25,000 = 105 II = 25,000 / 105 = 238.1 Amp
direct current
That would be an electric generator. They are also called dynamos. An alternator is a type of generator that makes alternating current.
A motor can be connected up to a car battery to store the power produced when it runs as a generator, but you will find that when current is drawn the motor needs more work to spin it, it will not spin so easily. That is because of conservation of energy.
The flux density of that coil becomes greater.
a generator
generator
When a conductive loop is moved through a magnetic field, an electric current is produced in the wire loop. This is the basis of electrical generators.
The spinning magnet in generators.
First ac has to be rectified into dc and then that could be stored in a secondary cell in the form of chemical energy.
A copper wire coil is rotated at speed in a magnetic field, to cause electrons to move. This is the electric current. The stronger the magnets and/or thicker the copper coil, the more current is produced
A generator moves a coil of wire through a magnetic field and that induces a current in the coil .
A generator moves a coil of wire through a magnetic field and that induces a current in the coil .