It is not clear how "average workload" is defined. Keep in mind that a gas-powered weed whacker is more powerful and can work wherever you need. An electric device is limited by the length of the cord or extension cord, which you will no doubt whack through at least three times each season. Weigh the size of the property you want to manicure and decide accordingly.
How easy is it to replace a spark plug wire on a gas weed eater?
What type of oil does weed eater or7000
No, electric weedeaters have a motor and a cord spool.
oil to gas ratio for weed eater
get a stihl
they can hold up to about 6 galons
Look in the operator/owners manual for the exact measurements for your weed eater. Pretty much everything is a 50:1 gas to oil ratio that I have ever used
To remove the gas tank from a Craftsman weed eater, first ensure the engine is cool and the fuel is emptied. Use a screwdriver to remove the screws securing the gas tank to the body of the weed eater. Carefully disconnect any fuel lines attached to the tank, taking note of their positions for reassembly. Once disconnected, you can lift the gas tank away from the unit.
A typical weed eater operates at a noise level between 80 to 100 decibels (dB), depending on the model and type (gas-powered or electric). Gas-powered weed eaters tend to be louder, often reaching up to 100 dB, while electric models usually fall on the lower end of the scale. Prolonged exposure to sounds above 85 dB can potentially lead to hearing damage. It's advisable to wear hearing protection when using loud power equipment.
Bad\dirty carburetor or not getting gas.
40:1
According to the Home Depot website there are two best sellers. They are the Weed Eater 200 mph 430 CFM gas blower/vac, model VS2000BV at a cost of $99.00 and the Weed Eater 9" electric line trimmer, model mini trim auto at a cost of $29.96.