Well yes there is its called electricians conduit measuring tool we found it on u tube . go to superconduits and watch the video .
Back set for all conduit sizes is not the same. The greater the diameter of the conduit the length of back set increases. Without the diameter size of the conduit, an answer can not be given.
any wall 2' or over
Power (watts) is amperes times voltage, or joules per second. Energy is joules, or watt-seconds. The length of time an electrical load is on is proportional to energy, not power.
Yes, any flexible conduit that has live wires drawn into it must have a ground wire also installed with the "hot" conductors. The reasoning behind this rule is that the flex in the conduit is coiled and has a long length to it. The continuation of the grounding medium through the tightness of the conduit connectors to the flex was not considered a properly secured grounding system so to overcome this weakness in the grounding system, a ground wire now has to be installed.
the electrical resistance of a conductor through unit cross-sectional area per length is called "resistivity of material"
An electrical conduit is a tube used to protect and route electrical wiring in a building or nonbuilding structure. Electrical conduit may be made of metal, plastic, fiber, or fired clay. Most conduit is rigid, but flexible conduit is used for some purposes.
PVC conduit is recommended for underground installations. Just remember that a ground wire equal to the maximum load current of the device connected at the other end has to be installed. This ground wire is not counted in conduit fill calculations. It has to have a green insulation in colour and be of a continuous length.
No. The new electrical code change does not allow any flexible conduit to be used as a ground means. It is now required to have a green ground wire pulled into the conduit with the other conductors in the flexible conduit. This grounded bonding conductor is not counted as wire fill when calculating the size of the flexible conduit to use
it is used for measuring length of something
Back set for all conduit sizes is not the same. The greater the diameter of the conduit the length of back set increases. Without the diameter size of the conduit, an answer can not be given.
No. Measuring is getting an exact length. Estimating is guessing what the length is
is it permitted to use flexible metal conduit over 6 ft in length as a grounding means
9-10, but the conduit may not exceed a certain length, or a certain voltage in order for you to "legally" do it. Many applications allow for conduit fill ratio's that exceed the standards of the NEC ( National Electrical Code) and most of them are short (less than 24") "chases" between control devices mounted in listed Junction boxes for that purpose. It is not advisable to fill a conduit more than the NEC allows for purposes of heat dissipation.
It is necessary because measuring tools help you measure the length of an object accurately.
Use a ruler, measuring tape or other device for measuring length.
All conduit shall not have more than 360 degrees for it's length between either a box, cabinet, or conduit body. Couplings count as a continuation of conduit.
For measuring length/distance, meter is used. Other units are km / cm/ mm.