The highest magnification that can be obtained from a microscope depends on the objective (main lens) of the microscope and has no bearing on the magnification of the eye piece.
A 10X eyepiece can only add to the magnification but cannot provide any further information.
it means a inclose of amicroscope
bfgf
multiply the magnification of the eyepiece by the magnification of the high objective lens. for example, if the eyepiece magnifies x10, and the high objective magnifies x40, then the total magnification would be 400x
Using a 10X eyepiece, a student would need to use a 10X objective to have a final 100X magnification. 10 X 10 = 100X
The total magnification is the object magnification for example 4x,10x etc. times eyepiece magnification usually 10x and you get the total magnification. The objective lens magnification is the lens right above the slide usually 4x,10x etc.
It has been a few years but I think it is just ocular times objective. (10x45=450) Thus, the specimen is magnified 450 times when viewed this way.
Magnifying an image allows for easier investigation and viewing capabilities. Images which are under a 10X objective magnification and 6 times larger than an image which is under a 4X magnification.
The eyepiece is the lens at the top of the microscope that you look in to see the magnified image of your specimen. The eyepiece also magnifies, usually 10x.
the piece that you look through to see the object, plus also magnifies, usually 10x.
Eyepiece is the lens through which we observe the specimen in a microscope. It multiplies and adjusts the magnification of the objective lenses. Sometimes, it even corrects aberrations of the objective lens.
The eye piece in a microscope is a lends used to see closer.
The magnifying system in a microscope typically consists of the objective lens, eyepiece lens, and sometimes a condenser lens. The objective lens is responsible for capturing the image of the specimen, while the eyepiece lens further magnifies the image for the viewer. The condenser lens helps focus the light onto the specimen for clearer viewing.
The high-power objective lens; which magnifies the specimen about 40x (depending on the microscope) and the low-power objective lens; which magnifies the object about 10x. If you arn't familiar with the given terms then look them up, there are probably answers on this website.
The ocular magnifies the already magnified image coming from the objective. The ocular usually magnifies that image 10 times.
The eyepiece has a magnification and is usually 10x.
The main parts of a microscope include the eyepiece, objective lens, stage, light source, and focusing knobs. The eyepiece magnifies the image, the objective lens provides additional magnification, and the stage holds the specimen. The light source illuminates the specimen, while the focusing knobs adjust the focus of the image.
multiply the magnification of the eyepiece by the magnification of the high objective lens. for example, if the eyepiece magnifies x10, and the high objective magnifies x40, then the total magnification would be 400x
The eyepiece lens acts like a magnifying glass looking at the image from the objective lens.
it is the one which magnifies specimen