Want this question answered?
decrease <--------WRONG!!!!! The operating breakeven point will remain unchanged.
"Explain why operating leverage decreases as a company increases sales and shifts away from the break-even point."
Peak (nomad)
Operating at an inefficient point, i.e. inside the PPF and not on the edge or line of the PPF
Computer Software are of three distinctive types such as System software consisting Operating System and Utility System, and Application Softwares. Therefore, Operating system such as Windows XP, Vista, 7 and Applications Software such as MS Word, Power Point, Excel and Access are not Utility Programs. Jeevan
(1) current amplification factor due to change in temperature. (2) collector current because of variation in leakage current.
(1) current amplification factor due to change in temperature. (2) collector current because of variation in leakage current.
Biasing of the transistor is responsible for stability of Q point.
because im handsome
The operating point of a transistor is simply the point, or circuit condition, where it is biased. With no signal present, the operating point sets the collector-emitter current, and the resulting voltages. Ideally, the operating point is chosen to be the midpoint of the linear region of operation, so as to minimize distortion and to maximize range. Since transistors have varying gains (hFe), and since the gain is temperature dependent, the operating point is usually chosen to be a range that also maximizes stability and minimizes the variability of the individual transistor.
econimic factor political factors social factors Another answers in the point of view (fashion related): Two major factors that change in fashion are: 1) War/Conflict 2) Sex
Transistors need thermal stabilization because the operating point of a transistor junction, similar to a diode, is affected by temperature. In fact, this can cause thermal runaway, and device destruction, if the circuit design does not compensate for this. Answer mostly correct but the operating point of a transistor must remain fixed as temperature varies whether going low or higher. that is mainly the concern about. not runaway that is caused by bad design.
Q-point means motionless point. At operating point the transistor emitter current and collector current doesn't change. That is why operating called as a quiesent point (q-point)
The operating point of a transistor is the point on its conduction curve that the engineer has selected for its operation, based on the intended function of the circuit the transistor is used in. This will vary with this function:a class A amplifier will have its operating point in the center of the linear range of the conduction curve.a class B amplifier will have its operating point at the cut off point of the conduction curve.logic gates will usually have the operating point near the cut off point off the conduction curve.etc.
No. Operating systems and Power Point are examples of computer software.
Usually, the operating point of a transistor shift because of temperature induced gain or bias changes.
decrease <--------WRONG!!!!! The operating breakeven point will remain unchanged.