0
What else can I help you with?
Where to get Carb settings for 1980 Suzuki gs 550 e?
start with 2 1/2 turns out on high speed needle start with 1 1/2 on your low speed needle. adjust high as needed
Ansmann vapor 4.6ccm factory settings?
The Ansmann Vapor 4.6ccm typically has factory settings that include a standard needle valve and idle settings optimized for balanced performance. The engine usually comes pre-tuned for a general range of conditions, focusing on reliability and ease of use. For precise tuning, users may need to adjust the high and low-speed needles according to their specific fuel type and environmental conditions. Always refer to the manufacturer's manual for the most accurate specifications.
Suzuki Dr-z 125 L carburetor adjustment?
what is the needle valve adjustment on a 125 DR
Factory settings for ktm 65 sx carb?
The factory settings for the KTM 65 SX carburetor typically include a main jet size of around 80-85, a pilot jet size of 45, and the needle set in the middle position. The air screw is usually set at 1.5 turns out from fully seated. However, these settings can vary based on altitude, temperature, and individual rider preferences, so it's always best to consult the owner's manual or a professional for specific tuning guidance.
What are some personification sentences with the word collapse?
The needle collapsed after a long day of work at the clothing factory.
Where is the size 9 neddle in j6's ship in aqworlds?
its not a size 9 needle it was like finding a size 9 needle in a size 11 needle factory he was talking about the mission room and that is on the secound door in the elevator 3 button
Why is their cream in the middle of chocolates?
because the people at the factory like cream and they take a big needle and put in the cream
How does a needle valve work?
A needle valve regulates fluid flow by using a tapered, needle-like plunger that fits into a conical seat. When the valve is turned, the needle moves up or down, adjusting the orifice size and controlling the flow rate. This design allows for precise control over the flow, making needle valves ideal for applications requiring fine adjustments. They are commonly used in hydraulics, gas lines, and laboratory settings.
How do you adjust the float on a Chevy 1970 Rochester carburetor?
Bend the tab that contacts with the "needle". But DON'T put pressure on the needle when you do so. Carburetor rebuild instructions that come with the carb rebuild kit will tell you how to adjust everything and give optimum float level settings.
Can you use the same needle in the same person twice?
Using the same needle on the same person is generally not recommended, as it can increase the risk of infection and reduce the effectiveness of the procedure. Reusing needles can lead to contamination and compromise sterility. In medical settings, it is standard practice to use a new, sterile needle for each injection or procedure to ensure safety and proper care.
What is the difference between a hypertonic needle and a hypotonic needle?
A hypotonic needle is a needle that is a non coring needle. A hypertonic needle is a coring needle. Both of these needles are used in IV's with a hypotonic needle used for hypotonic solutions.
Is it safe to have a MRI with huber needle inserted in port a cath?
It is generally safe to have an MRI with a Huber needle inserted in a port-a-cath, as long as the port and needle are MRI-safe. Most modern ports are made from materials that are compatible with MRI scans. However, it's crucial to inform the MRI technician about the port and needle beforehand, as they will need to ensure that the specific settings and protocols are appropriate for your situation. Always consult your healthcare provider for personalized advice before proceeding with an MRI.
