Search for XLR splitter
XLR refers, not to the cable (wire) per se, but actually to the type of connector used. An XLR connector has 3-pins and is used primarily in audio. Professional microphones and other audio equipment use it. Of the three pins, two are for the balanced signal, and one is for the shield. The wire used then is a two conductor shielded cable using a braided wire or a foil shield. So, an "XLR cable" refers to a two conductor, shielded cable with XLR connectors on each end.
Radio Shack carries a "2 into 1" adapter just for this problem. The two stereo leads will have a male plug. The adapter will use two females to this side. The single imput lead from the adapter will be male and plug directly into the mono-imput on your device. That imput will be female.
3 pin XLR's are mono. 5 pin XLR's are special connectors usually used in stereo microphones, but usually split on the other end to two mono XLR's.
A snail is both female and male. They are hermaphrodites.
Male and Female.
The two methods of reproduction are sexual (male and female) and asexual (no male and female . . . but simply splitting, for instance.)
The classic line up has three male and two female members.
Connect the yellow, male video connector of the standard Xbox 360 AV cable to the television's video port.3 Male red and white RCA connectorsConnect the two remaining male, red and white connectors of the standard Xbox 360 AV cable to the female-to-female RCA audio coupler
for males they have O shaped pink dots. there should be two on a male and a female. on a female there is an X
The bigger of the two is the male
The males fight for the female. Not usually with the female. In general, the male will harass the female to breed, but not fight with it.
There are two-1 for male and 1 for female:- Pelirroja (female) Pelirrojo (male) :) :D ;)