It is a faulty sticking injector, or LAMBDA Sensor, Or faulty ECU
No, but something that could cause uneven idle could cause the check engine light to turn on.No, but something that could cause uneven idle could cause the check engine light to turn on.
When the rich were getting richer and the poor were getting poorer.
Uneven staining on a wood surface can be caused by factors such as improper sanding, uneven application of stain, or differences in wood grain absorption.
A ship that lists is uneven due to bad trim, that is, it's uneven on its keel from front to back, or side to side (bow to stern, port to starboard). Normally, equalization of forward/aft, port/starboard water tanks are used to level the ship. However, uneven loading, or flooding can cause listing. Since flooding is always a possibility, watches must log the ship's list and draft every hour.
Rough idling in a 2003 Subaru Forester can be caused by several factors, including a dirty or faulty idle air control valve (IAC), vacuum leaks in the intake system, or issues with the fuel system such as a clogged fuel filter or failing fuel pump. Additionally, worn spark plugs or ignition coils can lead to uneven combustion, causing rough idling. It's also important to check for any engine codes that might indicate specific problems. Regular maintenance can help prevent these issues.
To fix an uneven wall causing tiles to not lay flat, you can use a leveling compound to smooth out the surface before installing the tiles. This will help create a flat and even surface for the tiles to adhere to properly.
Having uneven breasts is a common problem, however there are no health risk with it unless there is a lump causing the unevenness. If that is the case then one should have them checked by a doctor.
Could be,in need of a tune up, a vacuum leak, contaminated fuel (water), If we knew what year, make, model and engine more info would be available.
There was an uneven distribution. The rich were getting richer, while the poor were getting more poor.
Uneven staining on wood can be caused by factors such as improper sanding, uneven application of stain, or wood grain variations. To fix this, sand the surface evenly, reapply stain in a consistent manner, and consider using a pre-stain wood conditioner to help achieve a more uniform finish.
When the clouds are in front of the sun, they block off the sun to the earth witch causes uneven heating -your best friend and no-it-all annwiki
Yes, some tires are not made properly and the rubber can separate causing the tire to be out of balance causing a vibration. This is somewhat rare but it does happen. Most tire vibrations are caused by uneven weight in the tire or wheel combination causing the tire to be out of balance.