answersLogoWhite

0

Sure

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What could be causing water leak inside rear hatch on 2002 Pontiac Montana around the dome light and lower left side?

It could be the rear window wiper fluid supply line broken. The wiper fluid supply line run directly over the back dome light. My 2002 Montana had the same problem.


Where is the switch to work the rear wiper 2003 jeep liberty?

In the 2003 Jeep Liberty, the rear wiper switch is located on the end of the windshield wiper control stalk on the right side of the steering column. To operate the rear wiper, turn the stalk to the rear wiper position. For intermittent use, you can pull the stalk towards you to activate the rear washer. Remember to ensure the rear wiper is in the "on" position for continuous operation.


What size is the 2006 Pontiac Montana rear wiper blade?

151,000


Where is the rear wiper control on 2007 explorer?

On a 2007 Ford Explorer : The rear wiper control is on the inner part of the turn signal lever , closer to the steering wheel column . It has ( 2 ) intermittent wiper settings and the OFF position


Where is the switch for the rear wiper?

In my Ford Expedition, the rear wiper function is on the regular windshield wiper wand about half way down, toward the steering wheel. If you twist the little black knob(??) down, it will activate the rear wiper fluid feature, twist it up and it will give you a few intermittent options.


How do you change a rear wiper blade on a 2002 highlander?

The 2002 Toyota Highlander has a "Rock Loc 2" rear wiper arm which is incredibly simple to change once you find the difficult to find rear wiper blade. See related links below for information on the rear wiper blade and for installation videos.


What is the Windshield wiper size for a 2002 Pontiac Montana?

The 2002 Pontiac Montana takes 24" wiper blades on both sides front and a 16" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.


What size rear wiper blade does your 2002 Honda Civic si?

Since there are no aftermarket rear wiper blades available for the 2002 Honda Civic, you will have to go to the dealer for that rear wiper blade. See sources and related links below for info on a good place to get front wiper blades.


How do you turn off the rear wipers in a 2001 volkswagen jetta?

how do i turn off rear wiper for my Montana van


How do you turn off rear wiper on 2004 x5?

To turn off the rear wiper on a 2004 BMW X5, locate the wiper control stalk on the right side of the steering wheel. Rotate the stalk to the "OFF" position. If the wiper is set to intermittent or continuous, simply turning it to the "OFF" position will stop the rear wiper. Ensure that the front wipers are also off, as some settings may influence the rear wiper's operation.


How do you change wiper blades on a 2002 Montana?

The 2002 Pontiac Montana has hook-end wiper arms on both front and rear. See the Sources and Related Links section below for wiper blade installation videos and correct attachment/length wiper blade sizes. Also, if you purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through. Very simple.


Why 1998 Pontiac Montana rear wiper won't stop?

The rear wiper on a 1998 Pontiac Montana may not stop due to a faulty wiper relay, a malfunctioning wiper motor, or a short circuit in the wiring. Additionally, a stuck wiper switch can also keep the wiper activated. Inspecting the wiring and testing the relay and motor can help identify the issue. If needed, replacing the faulty component should resolve the problem.