usually faulty brake lights are either the brake light switch that senses when you press on the brake pedal, a connector somewhere between the brake light switch and the brake lights or the turn signal switch.
Have your Torque Converter/ Lockout Swith checked. I would also be worth it to have cam timing sensor checked. I had this exact problem on my 01 Aurora V8. Replaced sensor. Haven't had a problem since.
The sensor may be defective/broken. I would have that checked or replaced.
Have your fuel filter checked first. If that doesn't solve your problem, then have your catalytic convertor checked.
If the car vibrates when the brakes are applied, it could be a sign that the brakes or rotors need to be checked or replaced. When a problem like this occurs, it is best to get it checked out as soon as possible to avoid worsening the problem.
Could be a problem with the wiring from the computer to the sensor.
If the car vibrates when the brakes are applied, it could be a sign that the brakes or rotors need to be checked or replaced. When a problem like this occurs, it is best to get it checked out as soon as possible to avoid worsening the problem.
I had the same problem it was the crank shaft positioning sensor, not the camshaft positioning sensor, very different. Kinda a pain to get to but an easy and cheep fix once it is in.
have the engine timing checked. if the timing is wrong the engine will overheat, are you loosing coolant?is the fan working, is the water pump working?
Have you checked the lambda probe? It is a few hundred quid but fixed the problem for me. Get a garage to run a diagnostic to check that this is the problem before you get it done.
there is a problem with your cruise contol,have it checked. also have cam positioning sensor checked
Spark plugs need to be changed. had the same problem and it disappeared when I replaced the plugs.
I also have a 2000 Venture same problem. Solution was tire balance weights fell off. They were replaced and problem resolved but....the tires were worn irregularly on the inside and I had them replaced.