Your question is unclear. The adjusting mechanism release and lock is located on the underside of the left side of the steering column about 8-10 inches down the column from the direction signal stalk. Loosen to adjust - tighten to lock. If the mechanism is broken you must take it to a dealer to have it repaired or replaced. This is NOT a do-it-yourself project!
In the steering column.
Program a new key and ignition to a 2000 ford focus
poop
Tilt column? If so it will be the tilt knuckle that has came loose the whhel wont fall off but if gets too loose the steering could lock up tho
Check for loose/worn steering components i.e. tie rod ends, ball joints
need locations of steering column brackets on a 1998 ford ranger
Under the drivers side dashboard to the left of the steering column.
The diagnostic port is located at the bottom of the lower dash panel to the left of the steering column.
The shifter linkage bushings inside the steering column need to be replaced. They are available at your local Ford dealer.
Diagram for 1978 mustang steering column
This happened to me. I had to replace the key cylinder. I guess it happens when you have a key chain with 5 pounds of keys.
Ford focus with 2.0 eng.zetec