200*75*7
The thickness of paper is typically measured using a caliper or micrometer. The formula to calculate the thickness of paper is thickness = weight / (length x basis weight), where weight is the weight of the paper in grams, length is the length of the paper tested in centimeters, and basis weight is the weight of the paper in grams per square meter.
The formula to calculate the weight of a solid shaft is weight = volume × density × acceleration due to gravity. The volume of a solid shaft is calculated as π/4 × (diameter)^2 × length, where the density of the material and acceleration due to gravity are constants.
The formula to calculate the weight of a Teflon round bar is weight = volume x density. First, calculate the volume of the round bar using the formula for the volume of a cylinder: volume = π x (radius)^2 x length. Next, multiply the volume by the density of Teflon to find the weight of the round bar.
The formula to calculate the percentage of weight loss is: (Initial weight - Current weight) / Initial weight x 100.
To calculate the weight of a GI sheet, you need to know its length, width, and thickness, as well as the density of the material (galvanized iron). The weight can be calculated using the formula: Weight = Length x Width x Thickness x Density of GI sheet. The density of galvanized iron typically ranges from 7850 to 8050 kg/m³.
To calculate the weight of a galvanized steel pipe, you need to know the length, diameter, and thickness of the pipe. Use the formula: weight = (outer diameter - thickness) x thickness x 0.02466 x length. This formula assumes the density of steel as 7850 kg/m^3 and the length in meters.
MS Channel Weight: 100mm(length)*50mm(width)*5mm(thick)*.000785=19.625 Kg
density=mass/volume 7.850=2500kg/(0.47*L*0.914) Ravindra
kg = 6.16546 x width mm x OD2 x bore2 ---- 1000000
To calculate the empirical formula from a molecular formula, divide the subscripts in the molecular formula by the greatest common factor to get the simplest ratio of atoms. This simplest ratio represents the empirical formula.
To calculate the weight of an ISA 50x50x6mm angle, you can use the formula: Weight = Area x Length x Density. First, calculate the cross-sectional area of the angle (50x6 = 300 square mm), then convert it to square meters. Multiply the area by the length of the angle in meters and the density of the material (e.g., mild steel density is approximately 7850 kg/m^3) to determine the weight in kilograms.
The formula to calculate the density of cement fiber boards is: Density = Mass / Volume Measure the mass (weight) of the board, then calculate the volume by multiplying the length, width, and thickness of the board. Finally, divide the mass by the volume to get the density.