A burette, or buret, is a uniform-bore glass tube with fine gradations and a stopcock at the bottom, used especially in laboratory procedures for accurate fluid dispensing and measurement.
The buret is commonly used in titrations to measure precisely how much liquid is used.
A burette is a convenient piece of lab glassware, from which it is convenient to dispense a measured quantity of a lab reagent. This glass column is pre-filled with the desired reagent, and is marked along its column with graduations.
Burette is mostly used ,how much liquid is used in titrations.
A burette is used for measuring liquids.
Yes, a burette is the best tool for measuring acidYes, a burette is the best tool for measuring acid
burette
In analytical chemistry so many experiments are to be carried out to analyse the chemical properties of solutions/substances. The accuracy of analysis depend on the accuracy of iteration. An accurate reading is possible when it is fixed at perfect vertical position. In order to hold burette in a perfect vertical position during experiment a clamp must be used.
Base burettes are used for base titrants. Basically this is used in titrations where the analyte is an acid.
If you have an acid in your conical flask then the base will go into the burette. The burette is used to measure the amounts of base you are adding and therefore you will be able to determine the end point which is normally determined by a colour change.
Yes, a burette is the best tool for measuring acidYes, a burette is the best tool for measuring acid
A ring clamp is used to hold a burette.
The smallest possible burette reading is 0.10 and the uncertainty of a burette's reading is half of its smallest value (0.05).
A burette is used to very accurately measure liquid volumes.
burette
First remove all the solid particles from the burette using a scrubber. Then wash the burette with tap water followed by distilled water thoroughly (even the nozzle). Then wash the burette with the solution to be used in the burette.
In analytical chemistry so many experiments are to be carried out to analyse the chemical properties of solutions/substances. The accuracy of analysis depend on the accuracy of iteration. An accurate reading is possible when it is fixed at perfect vertical position. In order to hold burette in a perfect vertical position during experiment a clamp must be used.
Burette
Base burettes are used for base titrants. Basically this is used in titrations where the analyte is an acid.
If you have an acid in your conical flask then the base will go into the burette. The burette is used to measure the amounts of base you are adding and therefore you will be able to determine the end point which is normally determined by a colour change.
To remove any trace of other chemicals that may still be in the burette.
burette, noun a graduated glass tube with a tap at one end, for delivering known volumes of a liquid, esp. in titrations. http://en.wikipedia.org/wiki/Burette