Three ounces of Two-Stroke oil per gallon of gas
It depends if it is a 2 stroke or a 4 stroke. A 2 stroke engine, you mix the gas and oil. A 4 stroke engine, there are separate tanks for the oil and gas.
Unleaded....mixture is 50:1 with 2cycle oil in 2 a stroke engine. 4 strokes do not require you to mix fuel
The fuel mixture for a Yamaha 40 hp 2 stroke outboard engine is 50:1, gas, oil mixture. You should use new gas when you get the engine ready for the season.
If it is a 2-stroke engine, the oil/gas mixture has too much oil. If it is a 4-stroke engine, the oil sump is overfull.
Not really sure what you're getting at. If your lawnmower engine is a 2-stroke then you need a mixture of oil and gas to run it.
Intake
Fuel to oil ratio for a 8 hp Mercury, 2 stroke model, is 50:1. This is roughly measured out at one pint of 2 stroke oil, to six gallons of fuel.
on my suzuki gs 500 e motorbike you dont mix oil and gas its a four stroke engine
You will make lots of smoke and likely foul the spark plug and you will need to replace it. The engine is not designed to burn this mixture like a 2 stroke is.
2-stroke engines run on a gas-oil mixture put directly into the gas tank. They do not have a crankcase that holds oil separately like most normal 4-stroke engines.
Mixture of argon gas and Mercury gas.
you don't mix the oil/gas. you only do that on a 2 stroke engine. that is a 4 stroke. it has a separate reservoir where you put your oil. just put unleaded gas in tank and go.