answersLogoWhite

0

You have to remove the headlight which has 3 bolts(10mm socket&wrench) on top of it.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How do you replace passenger side head light bulbs in a 2000 Honda Accord?

How to replace passenger side head light bulbs in a 2000 Honda Accord?


How do you change 1971 dart light bulbs on the top of the fenders?

There should be a phillips head screw holding the light on, take the screw out and pull the light off the fender and then replace the bulb.


How do you replace dome light bulb in a 2007 grand prix?

should be able to pop the clear lens out with a flat head screwdriver.


How do you remove front left head light to change bulb?

HOW DO I CHANGE LIGHT BULBS


Replacing head light on 2005 grand prix?

if its the same as the 2004..its easypop the hoodlooking at the lights you see a white tab on toplift the tab and pull the headlight straight outto replace the bulbs ..they are just a twist lock, twist to align then pulllower bulbs like fog lights and signals ..remove headlight as above ..then reach down thru where the headlight was


How do you replace a head light switch 93 ford explorer?

replace head light switch on 93 ford explorer


Will a 1995 Pontiac Grand Am head light assembly fit in a 1993 Pontiac Grand Am?

yes it will i have swiched the head light assemblies on my car from a 95 grand am and yhey were same but you may need to adjust the head lights after you intsall it


How do you replace a light on a 1991 Chevrolet S-10 Pickup?

Assuming you want to change a head light bulb, open the hood and notice the two tabs sticking up behind the head light assemblies. These two tabs hold the head light assemblies to the radiator support. Wiggle the two tabs up and out and the head light assembly will come out the front giving you access to remove the bulb sockets for replacing the bulbs.


How do you change the rear brake light bulbs on a Chevy Malibu?

Open the truck & remove Philips head screw that is located to the left of the tail light housing in the trunk lid weatherstripping housing area. Next unscrew the trunk lining screw to fold back the trunk lining to get at the two plastic wingnuts that hold the light housing. Unscrew these two wing nuts and slide the housing out, then remove the bulbs and replace. Bulbs come out similarly to how you'd replace the front headlight bulbs (unplug, twist counter-clockwise to unlock and remove old bulb, replace with new bulb and turn clockwise to lock, plug back in).


How do you stop your 1997 grand am SE with a blown head gasket from overheating?

replace the head gasket


Where might one go to replace your head lights?

Most headlight bulbs can be repaired by the driver; a section of your owner's manual will detail the bulb-type and how to replace it. The head light covering itself requires partial dismantling of the front bumper and/or grill and requires the services of an auto mechanic shop.


Average cost to replace head gasket 99 grand am?

1700.00