Want this question answered?
Remove the end cap.
Best to ask a gunsmith for help.
Best to ask a gunmsith for help and check local laws.
Remove the gas system. Drift out the black cross pin out of the magazine tube. The pin is directly below the gas system through a polymer plug. The polymer plug should come out of the top of the magazine tube when you remove that pin, so be VERY careful when removing the pin. Now remove the magazine spring. On the follower end of the spring should be the plug you are wanting to remove. Remove it from the spring. And put the spring and polymer plug back in. The dished end of the polymer plug goes toward the end of the magazine tube.
remove the fill plug, then remove the drain plug, then reinstall the drain plug and add fluid until it comes to the level of the fill plug. remove the fill plug, then remove the drain plug, then reinstall the drain plug and add fluid until it comes to the level of the fill plug.
Remove the rubber cover and plug lead from spark plug. Using a bike plug spanner [cheap at your favourite auto supermart] remove plug.
Browning.com has manuals you can download for free.
There is no drain plug, you must remove the transmission panThere is no drain plug, you must remove the transmission pan
If you mean that the wire came out of the boot, then pull the boot off of the spark plug and use a spark plug socket to remove the spark plug.
Follow the instructions in the owner's manual
Get a spark plug socket and wrench that fits the plug body and remove it by turning counter-clockwise.
Remove the coil on top of the plug, then just remove the plug.