A closed hole flute is more popular of beginning flutist.
You can buy the little hole cover-uppers. Just look up the store company that you bought your flute from, and they should be able to tell you how to change your open-hole flute to a closed-hole flute.
depending on what model it is and what condition its in from 800-100 dollars
When you blow across the embouchure hole, the air that goes inside the flute vibrates. When you open a hole, the air is released from being trapped in the flute and goes out of that way. the air that vibrates is sometimes called the air-spring, and the shorter it is,the higher it is.
The Flute and the piccolo are both held horizontally, and they are both played by blowing across the top of the hole on the head joint piece.
USD$1-400, Depends on the state of conservation.
Not sure what you mean. You're not supposed to cover the embouchure hole, but if you miss an open-hole key or don't cover it well, it will sound out of key and maybe squeak.
You cannot clean your PlayStation 2 lens without opening it. You will have to turn the machine off, unplug all of the plugs and open it to get to the lens.
DGEGG
== == (it dependes on the flute) The modern flute is about 26 inches in length with and inside diameter of about 3/4", open at one end
no order. you just have to make sure your fingers have gotten into the habbit of covering up the holes. i took all of them out at once and began from there. it is really up to you.
Yes, Gemeinhardt produces a lovely tone and is great for a student who wants to score high in the music area. I suggest an open hole flute, which is for people who are intermediate-professional. It gives you a solid tone and a more pure sound. Gemeinhardts usually have an extra footjoint which allows you to play an octave lower than a regular flute. It is probably the most widely known and used student flute.