The electrical power generated must be AC exactly phase synchronized with the AC on the power grid. If it is not synchronized the generators will take power from the grid and try to run as motors and probably severely damage themselves and maybe other parts of the power plant.
Synchronized Methods are methods that have the keyword synchronized in the method signature. Synchronized statements are pieces of java code that are surrounded by brackets which have the keyword synchronized qualifying them. Both cases mean that - only one thread will be able to access the method or the statement that is synchronized
Reverse power flow into a generator can occur during synchronization if the generator is spinning too slowly, or the voltage phase angle is lagging relative to the power system. If the generator is spinning too slowly, power from the system is used by the generator to increase its' speed. If the phase angle is lagging, an initial spike of power will flow into the generator to force it into sync with the system. Typically generator's will match system frequency very closesly, and force the phase angle to leading slightly between the generator and the system. When synchronized, an extra bump of power will flow out while the generator is torqued into phase with the system. This will avoid tripping any reverse power devices.
A Synchronized block is a block of code enclosed by the {} braces that has a synchronized keyword before it. This block of code is similar to a synchronized method and only one thread can access it at a time.
A Variable that is shared as well as synchronized cannot be created in Java. These two terms are mutually exclusive and a variable that is synchronized in java cannot be shared and vice versa
of course a 800KVA DG could be synchronized with 18750KVA DG but there will be some unbalancing/unstability in the system and load sharing could create a problem but it can definetely synchronized and also other should also cheched voltage rating should be same and phase angle
The generator has to be synchronized to the power line before it can be connected. If connected out of phase there is a chance that the generator will motorize and this could break the crankshaft of the prime mover.
a synchroscopeis a device that indicates the degree to which two systems (generators or power networks) are synchronized with each other.ayaz ahmad4th engineer
It is a device that synchronize the electrical current from an emergency generator and main utility. It is usually used to prevent blink when main utility power comes back. It synchronized both current and slowly moved the load from emergency generator to main utility and released the emergency generator from the load.
It is a device that synchronize the electrical current from an emergency generator and main utility. It is usually used to prevent blink when main utility power comes back. It synchronized both current and slowly moved the load from emergency generator to main utility and released the emergency generator from the load.
The electrical power generated must be AC exactly phase synchronized with the AC on the power grid. If it is not synchronized the generators will take power from the grid and try to run as motors and probably severely damage themselves and maybe other parts of the power plant.
Synchronized Methods are methods that have the keyword synchronized in the method signature. Synchronized statements are pieces of java code that are surrounded by brackets which have the keyword synchronized qualifying them. Both cases mean that - only one thread will be able to access the method or the statement that is synchronized
It depends, there are a few. All of them are pretty simple. Synchronized swimming Synchronized skating Synchronized diving
dancing, swimming, iceskating and watches can be synchronized
There are synchronized by the clock System.
Synchronized.
Synchronized - album - was created in 2002.