it depends on the container vessel;
it is likely you can use a container/ box / vessel with small drainage holes at the base, and allow the water to soak through the sand ., leaving the sand behind.
Sive first to seperate the sand then boil or microwave until evaporated and you will have the salt.
You can separate sand from water by using a method called sedimentation and decantation. This involves allowing the sand to settle at the bottom of the container, then carefully pouring off the water. Alternatively, you can use filtration to physically separate the sand particles from the water.
OK so yuo have to get a coffie filter then get a cup pour gently to the filter then thats how you seperate water or if you what to get only sand not water you just put both in the cup and heat it and the water well evaporatve and you only have the sand.
Separating the nails from the sand is to use a magnet. This works .... and water in a sealed jar, the sand spreads through the water ...... to be crushed to a fine powder before the copper ore.
One way to seperate a mixture containing fine sand and water is through a process called filtration. Pour the mixture through a coffee filter over a glass or bowl. The sand should collect in the filter and the water should go through and settle in the bowl below.
no
by evaporation
Place the crushed rock and gem material into rotating drums filled with water. The water will disintegrate the small bits of volcanic material, leaving only diamond crystals intact. Add ferro-silicon sand to the mixture of water and ore to further separate the diamond crystals from the volcanic material.
by using the seperating techniques first you seperate it from the sand by filtration then you use a seperatin funnel and pour the filtrarte (the liquid in this case the gasoline and water) in this the liquid with higher density will sink (the gasoline) and you open the tap till almost al the liquid of higher density is out
It's possible to reverse the change. All you need to do is seperate the sand and the soil. No chemical bonds were altered or anything.
A compound it something that is fused together e.g. copper sulfate and is hard to seperate. A mixture is something more like sand and iron, it's easy to seperate.
it is not possible to seperate salt from the ice....bcoz...it is mixed up with water and if we make ithe ice into powder we can't seperate the salt from it...