1of 2 things..... 1.) either the techs forgot to clear the error code from the cars computer system or 2.) something else is saying it has a problem, thus causing the Check Engine Light to come on. Take your car to the mechanic or just about any service station or Auto Zone (or other parts store) and they will typically clear it for free. If it then comes back on you need to get the computer looked at again to see what the problem is now. You can also clear your own computer by disconnecting the Negative cable from the battery for about a minute, but this will also cause you to lose radio stations programmed in your radio. Typically it is much easier to go to the Parts Store, they can clear it in less than a minute.
by driving my car the hyundai elantra 01 stall out and i replaced spark plugs , cam sensor crank shaft position sensor and still not ignighte
how to replace a knock sensor on a 2002 hyundai elantra
The O2 sensor on a 2000 Hyundai Elantra is removed by disconnecting the wiring harness and unscrewing the sensor from its housing. It can then be removed from the vehicle, inspected, and replaced if needed.
The Crankshaft sensor is located on the front side of the engine block,near the flywheel/driveplate.
I believe it is a input speed sensor. Hyundai calls them pulse generators on the 99 elantra.
Remove the bolt holding the sensor to the front of the engine blockPullUnclip the electrical connectionInstallation is the reverse of removal.
The crankshaft position sensor is located on the front side of the engine block near the flywheel/driveplate
The crankshaft position sensor is located on the front side of the engine block near the flywheel/driveplate
I had this problem, I had a faulty TPS sensor
The Engine coolant temperature sensor is installed in a coolant passage which is located at the front left cornerof the cylinder head.
Vehicle speed sensor
The VSS sensor is located on the transaxle