Want this question answered?
you might try to spray the clear glass with a can of special spray called "DUL-COAT" is is normally used in hobby model building to give a painted surface a "dull" finish. It would probably work on clear glass to give it a "frosted" look
frosted
Some of the light is reflected, some is absorbed by the glass, and the rest makes it all the way through and comes out of the other side. Since the glass is "frosted" or"ground", the light is scattered (bounces around) inside the glass, and doesn't follow a straight path. Although the light intensity and illumination survive the trip through it, images don't.
The lumen output of the bulb should be determined by measuring the Lumens exiting the fixture that it is installed in. The reflector, lens and housing will all affect the the amount of "light" that exits the fixture to reach the space you are intending to illuminate. Bulbs will vary and Lumens will vary based upon the voltage. A typical 12V 20W Halogen bulb will yield about 180-220 lumens depending on the lens (clear vs. frosted) and the reflector type. Lumens will drop as voltage goes below 12Volts as the design voltage is specified in order to "excite" the halogen gas as it reacts with a tungsten coated filament. If the voltage isn't high enough the filament won't reach it's design temperature and the light won't burn as bright as it was designed to. a lone bulb will yield up to 280-300 Lumens with now housing, lens or fixture but it is also very dangerous due to the heat hazard.
A shower wall can be covered using several materials, provided they form a waterproof surface. Ceramic or plastic tiles, sheets of plastic, transparent or frosted glass, and so on.
In the UK it is not required to have the bathroom window glass frosted. But most people wants to have the bathroom windows frosted for privacy because one can only see shapes.
Only if you`re ugly.
Only if you`re ugly.
it should be opaque, so that no one can see
Another meaning for frost could be the act of covering something with a thin layer of ice, such as frosted glass or frosted cake.
Frosted glass is used on windows that will let in sunlight, but will stop people looking in from outside. A bathroom, or glass panels on an external door, will usually have frosted glass for privacy. Apart from frosted, other patterns can be used - small dimples, raised spots or lines, etc, can also be used.
Frosted glass is usually used on bathroom windows to keep stalkers away. It is made by sand-blasting glass or putting glass (while it is still hot) into amold.
"Frosted" can also be replaced wiht the words "decorated", "iced", "prepared", "put the finishing touches on", or "finished" a cake.
icy, frigid, numb, chilled, frosted
It means that light can pass through, but not in an orderly enough form to be transparent. An example would be the frosted glass in a bathroom window or a shower door.
1 / 5 not frosted
16 Cupcakes were frosted.