It could be a blown fuse. Tail lights and brake/turn are on separate fuses. Apparently there is not a ground problem since brake/turn works OK.
Wiki User
∙ 12y agoCheck the brake switch at the pedal.
The problem points to the directional/lights and hazard switch. The brake light wiring is part of that circuit.You can buy the switch after market it is about $70.00.
Look for a fuse labeled TAIL LIGHTS. There are 2 separate circuits, one for brake turn and flasher and the other is for tail lights.
On a toyota tacoma 2003 SR5 when the tail lights are turned on the brake lights come on and when the tail lights are of the brake lights work just fine what could be the problem. If the truck has a trailer plug, inspect the plug and plug wiring for damage and corrosion.
Are you saying your tail lights themselves do not work and only the brake lights work. If that is the case, check the fuse, and then check the tail light bulbs.
Check your fuses.
its on different bulbs
on some cars the tail lights and brake lights are totally different bulbs gain access to the bulbs and have someone push the brakes so that you can determine which bulbs are the brake lights and replace the tail lights
bulb is out The bulb has two elements in it, one for the tail light and one for the brake. The brake one is also for the directional signals.
Those tail lights could be the brake lights you are seeing and that would be a faulty brake light switch or the brake light switch is out of adjustment.
Fuse
go to a mechanic