0
Having trouble threading tubing on cnc lathe part keeps breaking during turning 012 wall 060 hole?
Wiki User
∙ 14y ago
Troubleshooting problems with threading tubing on CNC lathe parts can be a tricky process. Here are some tips to help you get to the root of the issue:
- Check if the part is clamped properly ensuring that the cutting forces are evenly distributed.
- Ensure that the tool is sharp and well-maintained.
- Check the feed rate and spindle speed to make sure that they are set to the optimal levels for the material.
- Check the depth of cut and make sure that it is not too deep for the material.
- Make sure that the tool is aligned correctly for the type of thread being cut.
- Ensure that the threading tool is set to the correct size for the diameter of the tubing.
- Check the chip load to make sure that it is not too high for the material.
By following these steps you should be able to identify and correct the issue causing the tubing to break during turning. Once you have identified and fixed the issue you should be able to successfully thread the tubing on the CNC lathe part.
Quinton Schimmel
Add your answer:
Earn +20 pts
How can you tell that the person who shares your room is having trouble sleeping?
Tossing & Turning, Talking, Watching TV, Lights on
Why would an 2004 Expedition with 52000 miles suddenly intermittently have trouble turning over when starting?
Dead battery if it is having trouble turning over or the starter motor is going out. Check the battery cables and ground straps at both ends for corossion
Could your truck not turning over be because you have no gas in it?
If the engine will not turn over, that is, sound like it is turning, then the trouble is a dead battery or really bad battery clamps. If the engine will not 'catch' and start running, then there are a number of causes, one of which is having no fuel.
How do you make a skateboard turn more easily?
If you're having trouble turning left or right..I would suggest you loosen your trucks on the board and then get a feel to how loose or tight you want the board.
Everybody knows that global warming is going to happen?
This is true. In their heart of hearts, even those who say they don't believe are having trouble with all the heat records breaking every year.
Do event planners create budgets?
If you are having trouble breaking down your budget, I highly suggest you call some event planners and get an estimate from each one. That will help you see who, if anyone, you can afford to hire.
What to do if having trouble sleeping?
chub
Can stress be a factor if you are having trouble sleeping?
Trouble sleeping can be caused by several factors. Stress is certainly something to consider if you are consistently having trouble sleeping as are other medical and lifestyle conditions.
What does having an individual lie down and elevate his or her legs after breaking a bone intended to do?
Having an individual lie down and elevate his or her legs after breaking a bone is intended to
What can you do if your dog having trouble having puppies?
Go to the vet right away.
What is the LCM of 12 14 and 16 that is between 300 and 400 IDK you have been having trouble with that?
I do not know because I have been have having trouble with that question.
My son is 3 weeks old and is having trouble pooping?
Your 3 weeks old son might be having a constipation if he is having trouble pooping. Try giving him warm water or breastfeeding.
