You could check the hoses connected to the heater are still in good shape. You can also check the fuses associated with the heater (ie: blower motor) to make sure thay aren't blown. There's the possiblity that the heater element may have broken down, which can happen given the age of the car.
The 1986 Honda Prelude does not have a clutch cable. The 1986 Prelude has a hydraulic clutch instead of the clutch cable.
drivers side under dash mounted in fuse panel
no parts for a 89 go thru years 88 thru 91
any engine will work with a little mod or alot of mods i wouldnt do it 86-89 honda accord should work
check your idle air control unit also called an IAC motor
As in SRS airbag? I'm going to say with reasonable certainty no as my 91 had no airbag.
Honda Civic 80-89, Integra 86-87, Accord79-83, Prelude 79-82, Honda wagovan 84-87
yes, the parts are interchangeable Edit by an 86 Prelude owner: note that an 89 prelude is the 3rd generation, and the 87 is a second generation, for body mouldings and panels they are not perfectly interchangeable, many of the parts from an 89 prelude will not fit an 87, Honda is notorious for changing little details that make things just incapable of fitting a seemingly similar car. the late 80's Accords and 84-88 Preludes will share many parts, but the 89-91 Prelude will not offer you a whole lot.
No Transmissions are usually car specific. You cant take a longer trans, and throw it on a smaller car... It would depend on what motor you have on the crx and what motor the prelude tranny came off from. I believe the 5 speed manual transmission on the prelude will mate up to both the 1.8L and 2.0L Prelude engine. So if your crx has either of those engines then you should be good to go.
It should be. No changes were made suspension-wise until the '88 model year.
86 prelude pcv locationThe 1986 1987 Honda prelude pcv valve is in the middle under the intake. It has a hose running through an opening on the intake. It is only accessible by removing the intake. The intake is very hard to remove in the carbecause the bottom bolts are so hard to get to.
yes they are the same the 2.0 l4 fuel injected