Using: 1 horsepower = 550 foot-pounds per second
800 x 200 = 160,000 foot-pounds per minute = 160,000/60 foot-pounds per second.
# Horsepower = 160,000/60 x 550 = 428/33 = 4.848 HP (rounded)
3.8
4.3
4.517
800×200=
800LB X 200FPM X 60sec/min divided by 550 Ft Lbs/sec = 17,455 HP (Seems too much....may have the equation wrong .... but that's my guess). thomasrobinson10 says, actually its 4.848 hp
Horsepower is defined as work done over time. The exact definition of one horsepower is 33,000 lb.ft./minute. Put another way, if you were to lift 33,000 pounds one foot over a period of one minute, you would have been working at the rate of one horsepower. In this case, you'd have expended one horsepower-minute of energy. There are other definitions but as a whole they say approximately the same as in energy consumed for actual work.
Horsepower is a measurement of the output of a motor. The formula for horsepower derives from the original meaning, which was how much coal a horse could move in one minute, which was rated at 330 lbs of coal raised 100 feet in a minute. One horsepower is therefore rated at 33,000 ft-lbs per minute.
we still need the flow volume required, and the type of fluid to answer this question. But essentially, how much energy (in ft lbs per minute in this case) will it take to lift the appropriate number of foot pounds of fluid in 1 minute. Get the foot pounds for 1 horsepower.
The Infiniti M56 has a horsepower of 420hp at 6,000 revolutions per minute.
Horsepower is the amount of energy the engine can produce, many other factors such as the weight of the vehicle greatly affect how horsepower corellates to speed. In exact numbers though, 1 Horse Power can move 33,000 pounds one foot in one minute or more simply 1 HP can move 375 pounds at 1mph.
For a 1997 Ford Thunderbird , 4.6 liter V8 engine : ( 205 horsepower from the factory )
The term horsepower was invented by the engineer James Watt. Watt was working with ponies lifting coal at a coal mine, and he wanted a way to talk about the power available from one of these animals. He found that, on average, a mine pony could do 22,000 foot-pounds of work in a minute. He then increased that number by 50 percent and pegged the measurement of horsepower at 33,000 foot-pounds of work in one minute. So, if you were to lift 33,000 pounds one foot over a period of one minute, you would have been working at the rate of one horsepower. In this case, you'd have expended one horsepower-minute of energy.
goes back to james watt experiments to define a unit for power involving using a horse lifting a weight up a mineshaft, arrived at: 1 hp = 33000 (lbs force - feet) per minute = approx 745 watts
The name of the first helicopter was called kiteoki(meaning an air transport)founded by an African mythologist by the name NKOANA KHUTSO.The first helicopter he created reached an approximate speed of 80 knots per minute.
Researching the horsepower of the Honda XR650 has provided some different results. This could be due to the motor of the specific bike. As a rule the horsepower of the XR650 is 43 horsepower at 6750 rpm's or revolutions per minute.