0
I'd replace the bulbs first. If that doesn't help, I'd suspect the dimmer switch.
I've replaced that stalk (turn sig. dimmer, cruise, headlight switch) in my '96. It's not a bad DIY job and the new stalk was about $60 at AutoZone.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Why are the low beams not working but high beams work on a 1997 dodge caravan?
Replace the bulb. The low beams and high beams use separate parts inside the bulb. If replacing the bulb does not fix the problem, check the fuses.
The high beams on my 2003 Pontiac Montana aren't working. Low beams are though. Any thoughts on what happened?
you may have a bad relay. If both of them are out, that is probably the relay for the high beams or it could also be a fuse.
Why does the passenger side headlight go out when turning on high beams on my 2002 Honda Odyssey This happens even when the lamps are swapped?
when high beams are turned on low beams go out u need to look at the wires and connetors 4 the high beams are not working on that side good luck
Why are your high beams not working in your 2003 ford expedition?
U might need new headlights
If your low beams quit working and two days later the high beams quit too what would you troubleshoot?
I would look for a bad ground if the fuse is good
How to fix High beams 1995 Lexus?
My 1995 lexus es300 high beam is not working tune it on is not working, i check the fuels and is good. Is any one know what the problem is?
Why do the high beams work but the low beams do not on your 1998 gmc?
I'm not sure if it is the same on a 98 as an 04. But on an 04 there is a relay box under the hood that has a relay for high beams and a relay for low beams. On an 04, it is on the driver's side behind the battery. You can check the relay by popping it out and exchanging it with another one that is working. Hope this helps
Why will my high beams work but my low beams do not on my 1994 Chevy half ton?
Your high beams work but your low beams do not because the switch is broken that switches between high and low beams. Electrical switches wear out.
Daytimelamps low beams not working high beams are replaced bubls relay switch and turn singnal light switch what could the problem be?
Have you checked the daytime running light module?
You have only parking lights working in your cavalier What happened to your regular lights and high beams?
hmm as you ask what happened to high beams, i am going to assume that low beam works. id this is correct i would say that your low/high beam switch needs replacing
When the low beams are on the high beam indicator is on too?
the high beam indicator is only on when the high beams are on
Why would my headlights quit working but the parking lights brake lights and tail lights still work and high beams do when switch is pulled back on a 94 Grand Am?
Low beams are burned out.
