High water pressure.
Hydrocleaning has various levels. "Low-pressure water cleaning" uses water pressure less than 5,000 psi, while "High-pressure water cleaning" uses water pressure between 5,000 to 10,000 psi. Higher still is "High-pressure water jetting" which is between 10,000 to 25,000 psi, and finally "Ultrahigh-pressure water jetting" uses pressures above 25,000 psi.
The solubilty of gases in water is increased at lower temperatures and higher pressures.
Considering a tsunami is a never ending wall of water and debris that crush everything in their path, I would say they were high pressure, but that is water, not air pressure.
what's the answer
Waterjet uses up to 60,000 psi pressure to project water streams through the cutting head. With the high pressure of the water, and abrasive particles (garnet) mixed in with the cutting stream, the waterjet is able to cut up to 12" thick materials.
IF water was put under enough pressure, yes. Here is a medical article about high pressure water injection injuries, like high pressure house washers. And a video about waterjet cutting of metals based on nozzle size, pressure, and abrasion materials:
air/water blasting media (35 percent); water jet cutting (30 percent), which used concentrated, high-pressure water jets for precision cutting of metals; water filtration (15 percent);
M. Hood has written: 'A review of water-jet-assisted rock cutting' -- subject(s): High pressure (Technology), Quarries and quarrying, Water jet cutting
High water pressure.
Soapy high pressure water
Water has a high pressure all the time.
Water jet machines are not a health device but rather cutter tools for cutting different types of materials with very high pressure of water or a mixtures of water and a substance of sorts.
alcohol has high vapour pressure than water at room temperature.
In regards to a water chiller unit, the terms low pressure and high pressure refer to the compressor, which takes low pressure and compresses it into high pressure gas, which is then turned into a liquid to cool the unit.
Hydrocleaning has various levels. "Low-pressure water cleaning" uses water pressure less than 5,000 psi, while "High-pressure water cleaning" uses water pressure between 5,000 to 10,000 psi. Higher still is "High-pressure water jetting" which is between 10,000 to 25,000 psi, and finally "Ultrahigh-pressure water jetting" uses pressures above 25,000 psi.
in Lower pressure water does not have to get as hot to boil