How do i add a Sump to Overhead Tank Controller in Chennai?

Answer 1

A sump to overhead tank controller is a device used to automate the process of transferring water from a sump (a reservoir or storage tank located at a lower level) to an overhead tank (a tank located at a higher level) in a water distribution system. The controller ensures that the overhead tank remains filled with water from the sump without overflowing or running dry.

Here's a basic overview of how a sump to overhead tank controller typically works:

1. Water Level Sensors: The system is equipped with water level sensors in both the sump and the overhead tank. These sensors are used to measure the water levels in each tank accurately.

2. Controller Unit: The controller unit is the brain of the system. It receives inputs from the water level sensors and processes this information to make decisions.

3. Pump Control: The controller unit is connected to a water pump that transfers water from the sump to the overhead tank. When the water level in the overhead tank is low, and there is sufficient water in the sump, the controller activates the pump to start transferring water.

4. Overflow Protection: To prevent the overhead tank from overflowing, the controller monitors the water level in the overhead tank continuously. Once the tank reaches a predefined maximum level, the controller stops the pump to avoid overflow.

5. Dry Run Protection: Similarly, the controller also incorporates dry run protection to prevent damage to the pump. It monitors the water level in the sump, and if the water level is too low (approaching the minimum limit), the pump is shut off to prevent running the pump without water.

6. Power Supply: The system requires a stable power supply to operate effectively.

When the water level in the overhead tank drops below a certain threshold, the sump to overhead tank controller activates the pump, and water is pumped from the sump to the overhead tank until it reaches the maximum level. Once the tank is filled or the sump runs low on water, the pump is automatically turned off.

The main advantages of using a sump to overhead tank controller are efficient water management, automation of the water transfer process, and protection against overflow and dry run situations. This helps to ensure a continuous and reliable water supply to the overhead tank while preventing wastage of water and reducing manual intervention.

#Doublemotorsequentialtimer #Waterlevelcontrollersinchennai #Waterlevelcontrollersinomr #Waterlevelcontrollersinvelachery #Watercontrollersinannanagar