Do an online search for the part you need and you will see the prices.
Very easy. Purchase the new starter and you see how easy it is.
About $135 for a rebuilt and $175 for a new. These are the prices at the parts house. If you have one put on by the dealer it will be twice this much for the starter.
There is no starter fuse on the New Beetle.
About 900
To replace the starter in a 2003 6-cylinder F150, first disconnect the negative battery cable to avoid electrical shorts. Then, locate the starter, which is typically mounted near the transmission on the driver's side. Remove the bolts securing the starter, disconnect the electrical connections, and then lift the starter out. Install the new starter by reversing the steps: connect the electrical wires, secure it with bolts, and reconnect the battery cable.
Remove the starter cables. Remove the retaining bolts. The starter will come off. Reverse the process to install the new starter.
Remove the positive battery cable from your 2001 Chrysler Sebring battery. Remove the cables from the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Remove the wires from the starter. Remove the retaining bolts. The starter will easily come out. Reverse the process to install the new starter.
To replace the starter on a 1985 Ford F150, first disconnect the negative battery cable to ensure safety. Next, locate the starter, which is typically mounted on the engine block near the transmission. Remove the wiring harness and the mounting bolts, then carefully pull out the old starter. Install the new starter by reversing the disassembly steps, ensuring all connections are secure before reconnecting the battery.
Remove the positive battery cable from your 2001 Nissan battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
$9,500.00
The part of the starter called the starter drive is shot and hopefully the flywheel ring gear is not damaged also. I would recomend removing the starter and inspecting the flywheel ring gear and if it looks okay replace the starter with a rebuilt or new one.