0
Basically, a gas turbine is powered by gas under pressure, The gas is pressurized by burning some type of fuel such as kerosene, jet fuel, or propane. That heat causes air expansion, and the subsequent inflow of air makes the turbine spin.
A gas turbine consists of three main parts; a combustion chamber, a turbine and a compressor. Air and fuel are mixed in the combustion chamber where it is ignited and increases in speed and power. This power is directed over the turbine blades which spin the turbine and power the compressor.
It's a pretty simple process: heated fuel causes pressure and air expansion. The expanded air causes a turbine to spin. That is how gas turbines like jet engines work.
What else can I help you with?
How inefficiencies of compressor and turbine affect back work ratio and efficiency of gas turbine?
Inefficiencies in the compressor of a gas turbine cycle increase the back-work ratio and decrease the thermal efficiency of the gas turbine cycle, since they increase the compressor work.
Why the temperature and the pressure of gas are decreasing after flowing out from turbine?
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
Gas turbine generator?
gas turbine generator
What type of work is performed during the expansion of the gas?
During the expansion of gas, work is performed as the gas pushes against a piston or moves a turbine, resulting in the transfer of energy.
Why is the gas turbine called as the power plant?
A gas turbine is one type of power plant. It produces power by burning gas to turn the turbine.
What is the effect or reheater in the gas turbine?
1.Turbine output is increased for same compressor work. 2.As more heat is supplied,thermal efficiency decreases.
What is effect if inlet temperature is increased on gas turbine?
Increasing the inlet temperature of a gas turbine can improve its efficiency and power output. This is because higher temperatures lead to better energy conversion and expansion of the gas, resulting in more work output from the turbine. However, there is a limit to how much the temperature can be increased before it affects the materials and components of the turbine, potentially reducing its reliability and lifespan.
When was Gas Turbine Research Establishment created?
Gas Turbine Research Establishment was created in 1959.
How gas turbine work?
Gas turbine works with the use of many kinds of fuel to run a compressor. The compressor will bring the atmospheric air flows through its highest pressure and with the addition of fuel into the air it will ignite and then the combustion will generate a high-temperature flow.
What is the function of IGV in gas turbine?
The function of IGV in a gas turbine is to prevent surges and stall conditions.
When first gas turbine works in gulf?
The first gas turbine in the Gulf started working in the 1970s
What is the difference between a Gas turbine engine and a piston engine?
a compressor does work on the gas , raising its pressure and temperaturea turbine does the reverse , it expands the gas as it passes through the turbine, extracting energy from the gas to do mechanical work.For a typical jet engine , the flow track on a compressor is of a converging cross section while is it diverging for the turbine, which is as per gas dynamic laws.The Turbine does two things here in the jet engine, one ,it runs the compressor and two, expands the gas to the propelling nozzle which produces thrust by accelerating the gas upto its exit.
