The formula you are looking for is I =W/E. Amps = Watts/Volts.
You need the formula: Amps * Volts = Watts But you get to do the math.
6 amps
There are zero volts in 6 VA. The VA stands for Volt Amps. VA for all intents and purposes is the same as watts. You need to state an amperage to find the voltage. Volts = Watts/Amps.
W = A x V. Watts = Amps x Volts. There is not a voltage stated to multiply the 6 amps with so an answer can not be given.
Watts and Volts are different units. It is like asking how many apples are there in 6 oranges. Watts = Volts x Amps x Power Factor Power Factor ranges from zero to one.
Volts = Amps x Resistance Therefore Amps = Volts / Resistance
To answer this question the voltage must be known. Watts = Amps x Volts.
That depends on the voltage, but the residential standard is 240 volt. At that voltage you sit at around 15 amps, however it MUST be on a 20 amp circuit for national (US) or Canadian electrical code, as you can only load your circuit to 80% of it's capacity.
None by itself. Watts are measurement of power, and power is volts times amperes. Secondly, the 6 volts must be in an electrical circuit (loop) to create current flow (Amps). Thirdly, the resistance of whatever the 6 volts is powering determines current flow (Amps). So, without knowing the current flow, you cannot calculate power. Fourth, power (Watts, horsepower, ergs, chevals vapeur, etc) is a measurement taken over a certain time - it is not instantly measureable with an inexpensive meter like a voltmeter or an ammeter (Amp-meter).
This depends on the voltage ... amps = watts / volts 660 W / 110 V = 6 amps 660 W / 220 V = 3 amps 660 W / 330 KV = 2 mA
The formula is P = E x I. Power in watts (P) is equal to the product of the voltage (E) and the current (I). The total power used at 6 amps and 120 volts is equal to 720 watts. If the voltage was 240 volts, the total power would be 240 volts times 6 amps, or 1440 watts.
Watts = Amps x Volts Assuming 115 Volts...do the math