Want this question answered?
When switches or any circuit opening devices are in series with each other, they all have to be in the closed position to energize the load.When switches or any circuit opening devices are in parallel with each other, any one of the switches or circuit opening devices in the closed position will energize the load.
Air pressure has molecules in it but other than that their is no connection
No. For any 3 way switch installation you need 2 "travelers" between switches and these conductors cannot be used for any other purpose. The 3rd wire is used for a neutral or switch leg, depending on the needs of the circuit, but is not connected to both switches. The neutral is not connected to either switch.
cloudes and wind !!
It provides switching for a single wire. It has one input and one output. When the switch is open (Off) the input is not connected to the output. When it is closed (On) the input is connected to the output.
If, by "HUSwith" you mean "hubs with", and by "hub" you really mean "hub" and not "switch" then you'll have either three collision domains (if the three hubs are not connected to each other) or a single collision domain (if the three hubs are connected to each other). Replace the hubs with switches and you'll have 30 collision domains, if the switches are not connected, or 32 or 33 if they are (depending on how the inter-switch connections are made: two switches connected to a common third vs. each switch connected to both the other two).
When switches or any circuit opening devices are in series with each other, they all have to be in the closed position to energize the load.When switches or any circuit opening devices are in parallel with each other, any one of the switches or circuit opening devices in the closed position will energize the load.
Air pressure has molecules in it but other than that their is no connection
Pressure /temperature relationship The greater the pressure normally the higher the temperature
Metamorphic rocks are produced by changing other rocks with temperature and pressure underground.
Other things being equal, the pressure falls in the same proportion as the absolute temperature.
No. For any 3 way switch installation you need 2 "travelers" between switches and these conductors cannot be used for any other purpose. The 3rd wire is used for a neutral or switch leg, depending on the needs of the circuit, but is not connected to both switches. The neutral is not connected to either switch.
You will actually need 2 3-way switches to control something from two locations. The first switch will receive the power, while the other will go directly to the load being controlled. The switch getting power will have the hot lead connected to the common terminal. The other switch will have its common terminal connected to the hot lead going to the load. Two "travellers" will be connected between the other terminals on the switches. They will be connected switch-to-switch. And don't forget that your neutral coming from the power feed will be connected to the load. Also don't forget to connect ground wires.
P1V1=P2V2 P1V1/T1=P2V2/T2 PV=nRT P=pressure V=volume n=number of moles R=the gas constant 8.31J/molK or 0.0821Latm/molK T=temperature in kelvin
One monitors pressure and the other monitors temperature.
cloudes and wind !!
It provides switching for a single wire. It has one input and one output. When the switch is open (Off) the input is not connected to the output. When it is closed (On) the input is connected to the output.