Want this question answered?
No, a smaller diameter wire has a higher resistance. The 0.01 mm wire will have 1/100 the cross-sectional area of the 0.1 mm diameter wire, therefore the resistance will be 100 times as high.
Its resistance would be half , 0.5 ohms is the answer.
At a greater diameter, the cross-section will also be greater, and therefore the resistance will be less. This assumes that other things are equal, of course.
decreasing the diameter of a blood vessel by ½by hussain :)
For a single temperature, yes. The copper wire will have a much smaller cross-section than the iron wire. For multiple temperatures, no. Copper and iron have different temperature coefficients for resistivity.
No, a smaller diameter wire has a higher resistance. The 0.01 mm wire will have 1/100 the cross-sectional area of the 0.1 mm diameter wire, therefore the resistance will be 100 times as high.
Over the same distance the larger diameter wire will have less resistance that the smaller diameter wire.
I'm not sure what you mean by "thicker resistance" wire? The thicker or more diameter of a wire the less resistance it has. A larger diameter wire would produce less heat. More resistance would produce more heat.
If the wire length is 100m and the Diameter is 1mm calculate the Resistance of wire?
Yes. Other things being equal, a thicker wire has less resistance.
Basic: The larger the diameter the less resistance.Deep:R = p (L / A)The resistance is proportional to the length of the wire divided by its cross-sectional area. p is the resistivity of the material in question and varies greatly. Since area (assuming a circular wire) is A = pi * r2 the larger the diameter of the wire the lower its resistance will be.AnswerResistance is inversely proportional to the square of the diameter. So, if you double the diameter, you will quarter the resistance. If you halve the diameter, you will quadruple the resistance.
Its elemental makeup. Its' diameter and its' length.
Use thicker wire. Doubling the diameter gives one quarter the resistance.
Its resistance would be half , 0.5 ohms is the answer.
At a greater diameter, the cross-section will also be greater, and therefore the resistance will be less. This assumes that other things are equal, of course.
large diameter wire simply because it will move easier Technically they would have the same resistance, but the larger diameter wire would allow more current to flow as it would have more room to move.
See related links.