All US bills, regardless of denomination, weigh approximately 1 gm. There are 453.6 grams in a US pound so you'd need a stack of 454 bills to weigh that much.
Each bill is 0.11 mm thick so 454 of them would form a stack almost exactly 50 mm high.
Banks generally do not like to do this. It would be much wiser to deposit the $100 dollar bill and then go to the back of the que, withdraw it asking for as many $5 dollar bills as they have availbable. ___ Many banks now have a machine similar to an ATM which will change notes and/or coins to other denominations.
It depends on how you define "old". Security strips were introduced with the 1990 "big head" redesign. Bills dated before that don't have the strip or watermark.
American currency is approximately 6.125" long x 2.625" wide x 0.004" thick. The base of a standard shipping pallet is 40" x 48". So, you can lay out the bills 6 wide and 18 across, or one layer of 108 bills. With 50,000 $20-dollar bills, (1 million bucks), that will be a layer of 463 bills deep. At 0.004" thick, that's a height of less than 2 inches high (1-7/8, really). Not very impressive looking at all. If you are considering shipping a 36-inch high stack, that would be about 975,000 bills. In twenties, that 3-ft high stack would be about 19.5 million bucks. But let's dream big. If they were hundreds, you'd be looking at 97.5 million.
I'm looking at one... doesn't seem to have one either. Or, it's a fake.More accurately:No. Security strips were introduced with the 1990 "big head" redesign.
if the value of dollar goes down, there are big effect to the ofw, for example the remittaces of the ofw when they sent the dollar here in Philippines the value of the dollar is depreciated.
We don't know. How big a stack? US bills are generally bundled in groups of 100.
Banks generally do not like to do this. It would be much wiser to deposit the $100 dollar bill and then go to the back of the que, withdraw it asking for as many $5 dollar bills as they have availbable. ___ Many banks now have a machine similar to an ATM which will change notes and/or coins to other denominations.
One British Pound (£1.00) comprises 100 pence, known as pennies, in the same way that a US dollar contains 100 cents.
Only one stack - if it is big enough.
Please check your bill's date again. he US didn't print any bills of any denomination dated 1978. The nearest date for $2 bills is 1976; those bills are only worth face value unless they are uncirculated. Correction: Yes they did make a 1978 two dollar bill. I am looking at one and holding it in my hand.
It depends on how you define "old". Security strips were introduced with the 1990 "big head" redesign. Bills dated before that don't have the strip or watermark.
All modern US bills (1-100 dollars) since 1925 follow the dimensions of 2.61 inches wide by 6.14 inches long. Therefore your 20 dollar bill, unless pre 1925 follows these dimensions.
All modern US bills (1-100 dollars) since 1925 follow the dimensions of 2.61 inches wide by 6.14 inches long. Therefore your 20 dollar bill, unless pre 1925 follows these dimensions.
big head hundread dollar bills i need some big head hundreads to go ang get my ones and twos
The answer depends on how big a stack. Also, a stack of mint bills tends to occupy less height than used ones.
Depends on the denomination or "currency".... Question needs to be more specific 1 million US Dollars in penny's 1 million US Dollars in 1 Dollar bills 1 million US Dollars in 100 Dollar bills 1 million US Dollars in Indian Rupee 1 million US Dollars in gold ...
Watermarks, security strips, and microprinting weren't introduced until the 1990 "big head" redesign. Older bills have very few anti-counterfeiting features. The most obvious is the presence of small red and blue fibers embedded in the bills' paper.