When you refer to a 200 amp welder you are talking about the output side of the welder. What you have to do is find out what the input voltage and current of the welder is to calculate the size of a generator needed to operate the welder.
Generators are rated in watts or kilowatts. The formula for watts is W = Amps x Volts. To size a generator for the welder the voltage of the machine must be stated.
Your house runs nowhere near 200 amps, so you need to make a list of appliances and fixtures that you use, or that you will need while the generator is running, and add their power consumption together. Add some extra capacity for growth and so the generator is not always at full power. Then talk to dealers about generators with the amount of power you need. To run the house on a generator with the same capacity as the service that you have in your house you would need a 50 Kilowatt generator.
Need to know what voltage the generator is outputing. The maximum voltage a 15kW generator will support at 200A is dependent on service voltage and configuration, the rated generator voltage, the power factor and the load frequency. If this is a typical service to a residential unit, eg. 220V single phase, then the generator will not be able to safely support 200A.
kW = I x E x pf/1000. Taking pf as .9 you get, 200 x 240 x .9/1000 = 43.2. The standard transformer for a 200 amp service is 50 KVA
Absolutely, you will have voltage drop, maybe enough voltage drop that the welder will not work <<>> To do a voltage drop calculation for the 200 foot cable the input amperage of the welder needs to be stated. At a maximum distance of 201 feet and limiting the voltage drop to 3% or less, a #6 copper conductor can deliver 37 amps on a 220 volt system. Check the nameplate on the welder to see if it falls withing the range of 37 amps input amperage. Do not use the welders output amperage.
Generators are rated in watts or kilowatts. The formula for watts is W = Amps x Volts. To size a generator for the welder the voltage of the machine must be stated.
what year is my welder code 9527 serial 294586c
If the service is single phase 200 amp then you would need a, W = A x V, 200 x 240 = 48000 watt generator. Since there are no 48kW standard generators you would have to use a 50 kW generator. If your home distribution panel is 100 amps then a 25 kW generator will work.
Your house runs nowhere near 200 amps, so you need to make a list of appliances and fixtures that you use, or that you will need while the generator is running, and add their power consumption together. Add some extra capacity for growth and so the generator is not always at full power. Then talk to dealers about generators with the amount of power you need. To run the house on a generator with the same capacity as the service that you have in your house you would need a 50 Kilowatt generator.
A portable generator is suitable for most homes in a blackout, you can buy a small generator for around $200 and it should power most or your appliances and lights in the event of a power cut.
They stopped making them in 2006, all 200 machines have a kabato diesel motor
1981
Need to know what voltage the generator is outputing. The maximum voltage a 15kW generator will support at 200A is dependent on service voltage and configuration, the rated generator voltage, the power factor and the load frequency. If this is a typical service to a residential unit, eg. 220V single phase, then the generator will not be able to safely support 200A.
kW = I x E x pf/1000. Taking pf as .9 you get, 200 x 240 x .9/1000 = 43.2. The standard transformer for a 200 amp service is 50 KVA
Well, let's see . . . If you can drive 200 miles in each hour, then it should take you 1 hour to drive 200 miles.
The 2012 Chrysler 200 has front wheel drive.
The 2014 Chrysler 200 has front wheel drive.