You could check ehow.com to figure out how to do it. Also there are various wikis online that could help you get started from people who have had experience doing that.
If equipped, it is on the passenger side. It starts behind the oil filter. It was an add on option when the truck was built. You may have to buy the cord from the dealer.If equipped, it is on the passenger side. It starts behind the oil filter. It was an add on option when the truck was built. You may have to buy the cord from the dealer.
You put it in on the low side in the line about center of the engine.
no, but with a truck you can hook up a oil rig.
A/T the same place you check it. Manual transmission, on the upper side of the transmission under the truck.A/T the same place you check it. Manual transmission, on the upper side of the transmission under the truck.
you take the cap off the valve cover on the passenger side of truck or the oil breather cap on driver side to add oil
You would add R-134a to the low side port which can be found on the Receiver Drier. You can find a drawing spec of this on the website link below.
I have the same truck. Driver side of the engine, on top of the valve cover there's a cap with a hose coming out. Unscrew cap and add oil there.
If equipped, it is on the passenger side. It starts behind the oil filter. It was an add on option when the truck was built.
I had the same question, and I found out you have to add it under the truck on the side of transmission you have to unbolt a plug and fill to the top... 4 quarts of synthetic. Hope this helps. Dan
Optimus transforms into a semi truck that is red and blue with flames
one side shoots out flames
gayness