Want this question answered?
Wt is the formula to convert cgpa to percentage in 10 point scale
mm is millimeters & wt is weight
The abbreviation for penny is d, from the Roman denarius. The wt is an obvious abbreviation of weight.So penny+weight = d+wt = dwt
weight of ISMC 400
Answer: 170ml of 5% acid must be added to30 ml of 25% to get 200ml of 8% acidLet x = wt of 5% acidy = wt of 25% acidEquations:x + y = 200ml ----equation 10.05x + 0.25y = 0.08(200)0.05x + 0.25y = 16 -----equation 2multiply equation 2 by 1005x + 25y = 1600 -------equation 3multiply equation 1 by -5-5x -5y = -1000 ------- equation 4eliminateequations 3 and 45x + 25y = 1600-5x - 5y = -1000=====================0 +20y = 600divide by 20y = 30substitute y = 30 in equation 1x + 30 = 200x = 200 - 30x = 170
Take 1.45 wt% oxide as an example. To remove the oxide component first you must work out the Ti component: 1.45 wt% oxide x 0.6 = Ti (wt%) because Ti in TiO2 makes up 60% its formula mass: 47.87 / 79.87 = ~0.6 Ti Thus 1.45wt% TiO2 = 0.87 wt% Ti
Wt is the formula to convert cgpa to percentage in 10 point scale
To convert ppm to wt%, you need to divide ppm with 1000000 to get to wt%.For example:If you have 4000ppm, it is the same as 0.004 wt%.I dont agree with this answere.Actually 4000ppm means 4000mg in 1Kg (1000g). Hence a simple solution is as under;1000g contains 4000mgor1000g contain 4 gm. Hence 100g will contains 0.4 grams. This is the answere i.e. 0.4%because % means amount present in 100 grams.The first answer above should be:To convert ppm to wt% (percent by weight), you need to divide ppm by 10,000.For example:If you have 4000 ppm, it is the same as 0.4 wt%.If a lab result for the concentration of lead (Pb) in a paint chip sample is 10,400 ppm, the concentration in percent lead by weight is 1.04. If the result is reported as 1.04 % Pb by weight, then the concentration can be converted to 10,400 ppm.
Convert oxide wt.% into molecular proportion of each oxide. This is done by dividing the wt. % of each oxide by the molecular weight of the oxide.
The Earth's crust is divided into two types: continental crust and oceanic crust. The oceanic crust is made of basalt while the continental crust is comprised mainly of granite. Basalts higher density compared to granite accounts for why the oceans are topographically lower than the continents. In terms of chemical composition, basalts vary in composition but generally have a chemical composition in the range, 45-55 wt% SiO2, 2-6 wt% total alkalis, 0.5-2.0 wt% TiO2, 5-14 wt% FeO and 14 wt% or more Al2O3. Contents of CaO are commonly near 10 wt%, those of MgO commonly in the range 5 to 12 wt%. On the other hand, granite also has a variable composition but on average has a composition of 72.04% SiO2, 14.42% Al2O3, 4.12% K2O, 3.69% Na2O, 1.82% CaO, 1.68% FeO. 1.22% Fe2O3, 0.71% MgO and 0.30% TiO2, 0.12% P2O5, 0.05% MnO.
It depends on if the Assay is in wt / wt or wt / L because if that's the case you will need to find the density of the 67-70% HNO3 at room temp.But basically you used the equation:C1V1 C2V2whereC1 initial concentrationV1 the amount of solution you will needC2 final concentrationV2 final volumeI would take the average of the assay for C1, so(67+70) / 2 68.5you need to know how much of the solution you want for example 3 Lthen you plug it in, this is also assuming that the initial concentration is in wt / LC1 * V1C2 * V268.5% * V12% * 3Lrearrange to form:V1 (2% * 3L) / 68.5% 0.0876Lwhich you can change into Wt / Wt with the density, or if you need mL just convert with ( 1000mL / 1L )
Glaciers
Veq = 133000*(Condensate specific gr/Mol wt of condensate) in SCF/STB Where, Mol wt of condensate = 6084/(API-5.9)
"wt"?
wt is an abbreviation for weight
Swedish Crown, called Krona (pl. Kronor, short form Kr.) in Swedish (international code: SEK) 1 USD = 7,02819713 SEK (as of 09/10/08) Cheers! =)
Take the wt and cube it.