Try graphite or lock lubricant
turn the key to the on position then pump the accelarator 3 times then turn the key off then start ur truck
my 97 doesent either solution ; turn key again.
turn key on, hit gas three times, turn key off ,start truck it should be cleared
Turn the key on do not start the truck then push the gas petal all the way to the floor 3 times...then start it the light should go off Turn the key on do not start the truck then push the gas petal all the way to the floor 3 times...then start it the light should go off Turn the key on do not start the truck then push the gas petal all the way to the floor 3 times...then start it the light should go off
try a fuel filter change first
not sure but the key is inside the fish tant thats what i want to start the truck! but the fish inside keep hurting me if you turn that remote off and try to swim the fish will hurt you be careful!
Probably a bad ignition switch.
turn key to on position but don't start it, depress the gas pedal fully 3 times then start the truck and the warning should be gone!
Turn key on do not start, push gas pedal all the way to the floor and let all the way off 3 times then turn key off then start truck.
Read closely, This will take 33 mins. to do. Get in your truck with a watch, Turn key to start mode and as soon as you here the starter, turn key loose not off. Then wait 11 min. no more and no less 11 min. only After 11 min. turn key off, then repete the same steps 2 more times. Then after the last step is done, turn key off, Then start truck, Your done. If truck don't start. Then repete all the steps again, to make sure it was only 11 min. each time. BEFORE YOU DO ANYTHING CHECK THE SECURITY FUSE IN FUSE BOX.
My truck did that once or twice. Both times it was because the fuse had blown that powers the brake lights. I did also find out that if you shut the truck off and turn the key on that you can get it into netrual, then you can start the truck and move it.
If you mean the change engine oil light, and if your truck is like mine,then you turn the ignition key to the on position,(don't start truck), and step on the accelerator three times, then turn the key off. The light sould be gone after that.