you could take of the govenor witch is some where near the carbureter
or you could put bigger wheels on the back that made my westwood go a bit faster
In automotive terms, There are drive pulleys such as the drive pulley mounted to the crankshaft on most engines. There are driven pulleys such as an alternator, power steering, water pump, a/c compressor and all the accessories driven by the drive pulley. There are idler pulleys and tensioner pulleys. There are timing belt pulleys. And for non automotive related terms, There are block and tackle pulley systems. There are pulley hoists. Wire rope pulley blocks. Cable pulleys. Rope pulleys.
Large drive pulley, small driven pulley = faster rotation but less torque. Small drive pulley, large driven pulley = slower rotation but more torque.
Check you serpentine drive belt and pulleys.
Undersized pulleys will turn the power steering, alternator, A/C compressor slower that standard sized pulleys therefore using less power from the engine. The freed up power may allow you to drive slightly faster than before. The true benefit for most street cars is better fuel economy. In a high powered race car the benefit can be measured in hundredths or thousandths of a second. The horse power gain has been claimed to be 5 - 15 extra horsepower.
Driver Drive Faster was created in 2008.
It depends which "pulley" you mean. Drive pulleys are on the front of the engine.
yes
Some where in the radiator shroud or engine compartment there should be a serpentine belt diagram. Follow diagram or picture. Rotate the drive belt tensioner away from the drive belt and install the drive belt on the alternator pulley. also the pulleys the smooth side of the belt goes on the smooth pulleys the belt side with the teeth go on the pulleys with the teeth
The drive performs better if it spins faster.
Not necessarily. Some fans use belts on pulleys to transfer the rotary motion of the motor to the fan blade, while others use gears, and some are direct drive.
probably to drive the motor, I dont really know sorry
It is the route the belt follows around all the pulleys on the engine that belt is driving.