This information can be found in your owner's manual.
To reset the maintenance service light in a Toyota Avalon, turn the ignition switch to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off. If it remains on, repeat the process or consult the owner's manual for further instructions.
To reset the maintenance light on a Mercedes B200 when the "Service Term Exceeded" message appears, turn on the ignition without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn off the ignition and restart the vehicle; the maintenance light should be reset. If the light remains, consult the owner's manual for specific instructions based on your model year.
Usually, for service lights, you have to take it to the dealer, and they can turn it off with their systems
To reset the service light on a 2008 Fiat Bravo, first, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds, and then turn the ignition off. When you start the engine again, the service light should be reset. If the light persists, consult the owner's manual for further instructions or verify if additional maintenance is required.
To turn off the maintenance required light on a 2006 Honda Element, first, turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After this, the maintenance light should reset and turn off. If it doesn't, check if the vehicle requires any actual maintenance or consult the owner's manual for further troubleshooting.
To turn off the maintenance light in a 2007 Volvo S60, first, turn the ignition key to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After doing this, the maintenance light should reset and turn off. If it remains on, you may need to check for any underlying issues or consult the owner's manual.
If you have another light that says Check Engine, then the Service Engine Soon light means to change the oil/filter or perform some other maintenance item as listed in your owner's manual. You will see the other light when you turn on the ignition. If however there is no Check Engine light, this light means there is a problem with the emissions system.
To reset the maintenance light on a John Deere X495, first turn the ignition key to the "Run" position without starting the engine. Then, press and hold the "Hour Meter" button until the light resets. Release the button, and the maintenance light should turn off. If the light remains on, repeat the process or consult the owner's manual for further instructions.
To turn off the maintenance required light on a 1999 Chevrolet Express Van, first, ensure that any necessary maintenance has been performed. Then, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. This should reset the maintenance light. If the light remains on, consult the owner's manual or a professional mechanic for further assistance.
To turn off the maintenance request light on a 2013 Toyota Camry, first, ensure that any necessary maintenance has been completed. Then, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, and the light should turn off. If it persists, consult your owner's manual or visit a dealership for further assistance.
Listed in your owner's manual. Next to the maintenance required light, you should see a small slot with a button in it. Stick your ignition key into the slot and hold it in for about 10 seconds. When you start your car, the light should be green, indicating that it has been reset. The maintenance light will turn orange automatically the next time that the mileage reaches one of Honda's recommended maintenance intervals.
To reset the maintenance light on a 2004 Nissan Armada, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off, indicating that the reset was successful. If the light remains on, repeat the process or consult the owner's manual for further instructions.