you can get stuck and never get out!
Answer 2
Coo! Yes. Also a lump might fall on you.
water /cement ratio
yes
The insoluble residue in cement mainly consists of unhydrated cement particles, minerals, and impurities. These residues can affect the performance and properties of the cement, such as strength development and durability. Proper quality control measures are important to ensure optimal composition and properties of cement.
Cement hardens through a chemical process called hydration, where water reacts with the compounds in the cement to form crystals. This process creates a strong and durable bond between the cement particles, resulting in a solid and hardened structure. Factors such as water-to-cement ratio, temperature, and curing time can affect the strength and durability of the hardened cement.
Residue of cement refers to the solid material that remains after the hydration process of cement has taken place. This residue can affect strength and durability of the concrete and should be minimized through proper mixing and curing practices.
Three varieties of the strength of cement are measured – compressive, tensile, and flexural. Several factors affect the strength, such as water-cement ratio, cement-fine aggregate ratio, curing conditions, size and shape of a specimen, the manner of molding and mixing, loading conditions, and age. I hope it will assist you.
Mixing Clorox (bleach) with cement can release harmful chlorine gas, which is toxic if inhaled and can cause respiratory issues. It can also weaken the structure of the cement and affect its longevity and strength. It is important to avoid mixing these two substances together.
Cement should be stored in dry conditions to prevent it from absorbing moisture, which can affect its setting and curing process. Moisture can cause clumping or hardening of the cement, reducing its effectiveness. Storing cement in a dry environment helps to maintain its quality and ensure proper performance when it is used.
cement cement it is easier to run on cement cement
The construction industry uses both the natural and the synthetic forms of gypsum in Portland cement manufacturing. Although the amount of gypsum used in the mix represents a small percentage of the volume of all ingredients, gypsum has important functions.
When cement is mixed with water, it forms slurry which gradually becomes less plastic with the passage of time & finally a hard mass is obtained. In this process, at a certain stage when the cement paste is sufficiently rigid to withstand a definite amount of Pressure, it is said to have set & the time required to reach this stage is termed as "setting time".
As concrete ages, its strength typically increases due to continued hydration of the cement particles, which can affect the water-cement ratio's impact on strength. Initially, a lower water-cement ratio leads to higher strength, but as concrete matures, the difference in strength between varying ratios diminishes. This means that while a low water-cement ratio is critical for achieving high early strength, the age of the concrete plays a significant role in enhancing overall durability and strength over time, regardless of the initial ratio. Thus, the strength curve generally shows a rising trend with age, independent of the initial water-cement ratio.