Your engine has worn piston rings. Get it fixed asap because the oil is no good and will seize the motor. it can also come from flooding carb especially on new engine
nope they are different models
ya...its a sbc...they all interchange
You will need to drain the oil from your 1989 Chevrolet 5.7 liter engine oil pan. Remove the oil pan bolts. The oil pan will come off.
all oil pans go to 10 ft lbs.
Of course, there is no other way to get at the pump.
To remove the oil pan from a Chevy 350 engine, first, ensure the vehicle is on a level surface and the engine is cool. Drain the engine oil and remove any components obstructing access to the oil pan, such as the exhaust or crossmember. Unbolt the oil pan from the engine block, carefully prying it loose if necessary, and then remove it from the engine. Clean the mating surfaces before installing a new gasket and reattaching the oil pan.
It's inside the oil pan, bolted to the fifth main bearing cap. INSIDE the crankcase. You can get to it by dropping the oil pan.
If it has the stock oil pan on it, then it will hold 5 qts. with a new filter.
Yes.
thats not a question but they do make them and summitracing.com sells them. Randy
You would probably need to contact a custom oil pan fabricator such as Hamburger or others and have one made.
oil pressure switch or knock sensor