0
A white box tester, also known as clear box testing, is a way of testing software that tests the internal workings instead of its functionality. To be a white box tester one could try applying to software companies such as Microsoft.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What to do with the white wire in track light with black green and white wires if the house does not have a white one?
The white is neutral. The house does have a neutral wire even though it may be black. One of those black wires is the neutral and the other is the hot wire. You will have to determine which is hot and which is neutral. You can easily do this with a voltage tester. The wire that lights the tester is the hot. When you wire the light simply wire the hot to hot, and the white and green to the other wire.
Black box testing in software engineering?
Black-Box Testing is a technique of testing without having any knowledge of the interior workings of the application.The tester is oblivious to the system architecture and does not have access to the source code. Typically, while performing a black-box test, a tester will interact with the system's user interface by providing inputs and examining outputs without knowing how and where the inputs are worked upon.White-box testing is the detailed investigation of internal logic and structure of the code. White-box testing is also called glass testing or open-box testing. In order to perform white-box testing on an application, a tester needs to know the internal workings of the code.
Where can one find a white toy box?
There are many places where one can find a white toy box. One can find a white toy box at popular retail stores such as Toys R US, Walmart, Target, Kohl's, Sears, and Shopko.
Where is the White Box on the back of the Sims Box?
the bar code white box is on the upeer right hand corner. the other one is on the bottom left corner.
I disconnected my cealing light and now i dont know were the wires go can you help?
If you have two wires in the ceiling, they should be black and white. Old wire it may be hard to tell. For two wires for just a light, it doesn't matter. You should wire black to black and white to white but nothing will happen if you reverse them. The light fixture should have black and white also and probably a green or bare wire for the ground. You could have 4 or 6 wires in two groups of 2 or 3. Power comes into the box, one leg goes to a wall switch and comes back to the light. If you do not know which is the power coming in you can test each group with a tester. A cheap tester is available for around $4. If there are two groups of wires, try the tester on each group. The black and white of each set. Black is hot, white is neutral. When you find which line is the power coming into the ceiling box, the white one goes to the white one in the fixture. The two black ones are twisted together and held with a wire nut, the second white wire which should now be considered black goes to the black wire in the fixture. Power comes into the ceiling box on the black wire, goes to the switch on the second black wire and come back to the ceiling box on the white wire. That completes the circuit. There can be other variations, but those are the most common. If there is still a question, message me back with more information.
How do you use a utp cable tester?
there is lan tester available in the market, we have to connect one side of the crimped cable to one of the part of lan tester and the other side crimped cable had to be enter the other part of the lan tester... then we have to on the lan tester and we are able to visible LED's blinking one after the other , if not ther is a problem in crimping the cable..
Where can one purchase a PH Tester?
A pH tester is used to determine the acidity or alkalinity of a substance. One can purchase a pH tester online at websites including Home Depot, Amazon and Sears.
Where can one purchase a robin loop tester?
One can purchase a robin loop tester from Ebay. One can also purchase a robin loop tester from electrical shops or from electrical dealers which carry robin loop testers.
How do i change my display picture on mercury messenger?
I worked all morning to figure this one out and i got it. first have whatever picture you want as your display picture on your desktop. then you simply go to account settings. then a box will appear and click display picture. a big empty white box will appear. now drag the picture you want from your desktop to this white box. click apply. then click ok. finished
What are the qualifications you need to be a software tester?
From what I have read, one needs to be have a grasp of what constitutes functional software. Having formal credentials in software programming is a great way to set one's self apart when attempting to apply for such a position.
Where can you buy a gold testing kit?
One can purchase a gold tester from the Jewelry Tools website, which sells a high quality and well rated tester. The tester is currently being sold for about one hundred and ninety dollars.
How do you find phase and neutral in the circuit?
Neutral will be closest to protective earth ground. In the US, neutral is white. we can check using tester ,when tester is connected to phase only lamp of the tester glows and when it is connected to the nuetral the lamp does not glow. another method is, connect the voltmeter to any one of the terminal and ground if the voltmeter shows 110v 0r 220v then it is phase and the other is nuetral.
