How can you build a bite sleeve?

Answer 1

Well u can use a motor cycle tire or a small trailer tire cut it in half I used a grinder it worked pretty well than u cut a portion for ur arm from one of the halfs measuring from ur elbow to a couple inches past ur hand than cut a price from ur shoulder to aprox. 3-4 inches past ur elbow wen both peicess are cut get two nuts and two bolts and four washers u will use these to create the joint placing one on the left side of the tire wall than the other. u only want enough of the threads to stick out to get the nut and washer on once u join both peices get a nut and bolt to use for the handle it needs to be long enough to go into the left or right tire wall than through the other tire wall once again selecting a bolt that only allows enough threads to get the nut on so the dog won't get hurt u may want to wrap this bolt in tape or a hose for comfort. The sleeve is now built all that is left to do is cut slits along the tire walls for straps to secure one tire wall to the other which will keep it on ur arm that's it. DO NOT LET UR DOG BIT IT WITH OUT A SLEEVE COVER!!!!!!!!! their are wires in the tire that could hurt the dog it is important that all the bolts are only long enough to get the nuts on! If their are more threads sticking out past the nuts it could impail u or the dog depending which way u place them