Voltage is a property of electrical potential. Amperes (and miliamperes) are the units of electrical current. Even though these are related to each other in a circuit, they are not the same thing, and they cannot be "converted" into each other.
Also, these properties are only related through a "load" the circuit provides (the resistance and inductance of the circuit), and make sense only when related to each other this way. If there is current, there will be voltage as well, but if there's only voltage, there will be no current unless there is some resistance as well (even a wire has resistance) - otherwise the circuit is "open" and no charge is flowing.
In a simple circuit with a voltage source and resistor:
milliamps = voltage*1000/resistance.
If your circuit has diodes, capacitors, inductors, etc. it gets much more complicated.
You can't convert them directly, because they measure different things. The unit for energy is the Joule. Power means how fast energy is transferred; it is measured in Joules/second, also called Watts.
That depends on the voltage.
You don't have enough information in your question, you need to include the voltage as well. One relevant equation is V = I * R where V: Voltage, I: Amps, and R: Resistance. When you have the voltage divide the Ohm resistance into that and you'll get your amps.
the three uses of energy are voltage, amps, and resistanc
The current draw in amps mulitiplied by the voltage.
Can not do it without knowing the voltage I = E/R. Amps = Voltage/Ohms.
Milli = 1/1000. This is all the info that you should need.
To convert amps into watts a voltage is needed. Watts = Amps x Volts.
400 milli amps total.
To convert watts to amps a voltage value must be given. Amps = Watts/Volts. Amps = .011/Volts.
3500 mA
No.By which I mean: amps and watts are not just different units, they're different TYPES of units. You can't convert amps to watts without knowing the voltage (if you DO know the voltage, multiply volts by amps to get watts).
5000w / 120 volts = 41.66 amps P=E*I transposed to I=P/E
You would also need to know the current in amps. The formula you need is this: P = I V Power (in watts) = current (in amps) x voltage (in volts)
Milli means a 1000Th of a unit. It is convenient since 1 micro amp if written becomes 0.000001 amps and 1 Milli amps becomes 0.001 So, to convert milliamperes to amperes, you divide by 1000.
Power P = amperage I times voltage V. The power is 0.7 times 9 = 6,3 watts.
ma stands for milliamp. The prefix 'milli is equivalent to .001 So 1 amp would be 1000 milliamps and 20 milliamps would be .02 amps