Replace the valves guide seals.
Need more info. It can be $5 for a Tire valves to $2000 from bent valves/damaged pistons.
I would use a tap and die set to re-thread the shaft down one size.Since it's just a hold-down nut, it won't affect the functionality.
around 900$
Add a little white wine and make fondue!
You can get a heart valve surgery to fix that. You can also avoid eating oily food that can clog up the valves. By not doing so, you are at risk of heart attacks.
To fix a flapper for a toilet that is not sealing properly, you can try adjusting the chain length, cleaning the flapper and the seat it sits on, or replacing the flapper if it is worn out.
Take the head off and replace BOTH valves.
Block, crank, pistons, and valves. Those are the main parts that cost the most to fix.
you need to have the timing belt replaced....if it has broken you have probably bent the valves
The pipes in your house may be squealing due to high water pressure, loose or worn-out valves, or air trapped in the pipes. To fix the issue, you can try adjusting the water pressure, tightening loose valves, or bleeding the air out of the pipes. If the problem persists, it's best to consult a professional plumber for further assistance.
If the valves are ticking they are likely damaged. If what you hear is lifter tap, then it is due to poor design from the factory or you need an oil change. Lifters from a 3g Eclipse (00+) fix this problem.
My Toyota corola 1.6gl 1989mod 16valve, lost the idling. wat can i do to fix it?