assuming it's hollow. 10.68*ID*(OD-ID)
The answer depends on the thickess of the pipe. The universal formula for carbon steel pipe weight is 10.6802 x T x (OD-T) T=Thickness of pipe OD=Outside Diameter If your pipe was carbon steel with a thickness of .375" it would be 238.8 lbs/ft
steel pipe 200mm per meter kg wait
"Solid Steel" would not be a pipe- it would be a rod. Weight of pipe will vary depending on the thickness of the wall of the pipe.
The weight of a hollow MS (mild steel) pipe depends on the thickness of the pipe wall. The weight can be calculated by using the formula: Weight = 0.02466 * Thickness * (Outer Diameter - Thickness) for a round hollow pipe.
Steel pipe varies in weight according to size and thickness (schedule).
To calculate the weight of a galvanized steel pipe, you need to know the length, diameter, and thickness of the pipe. Use the formula: weight = (outer diameter - thickness) x thickness x 0.02466 x length. This formula assumes the density of steel as 7850 kg/m^3 and the length in meters.
Find the circumference of the exterior of the pipe, then find the circumference of the interior. subtract the two to find the thickness of the pipe. then multiply the length of the pipe. Now you have the mass of the pipe, so calculate that into the weight of steel or aluminum or whatever the pipe is made of.
Steel pipe will not float in water because it is denser than water. The density of steel is significantly greater than that of water, which is why steel sinks. However, if the steel pipe is hollow and filled with air, it may float depending on its overall buoyancy, which is determined by its shape and the ratio of its volume to its weight.
To calculate the weight of structural steel, you can use the formula: weight = volume × density. First, calculate the volume of the steel by multiplying its length, width, and height. Then, multiply the volume by the density of the specific type of structural steel being used to determine the weight.
The weight of a mild steel (MS) pipe with a 250 mm outer diameter depends on its wall thickness and length. For example, using a standard wall thickness of 8 mm, the weight can be approximately calculated using the formula: Weight (kg/m) = (Outer Diameter - Wall Thickness) x Wall Thickness x 0.02466. This results in a weight of around 22.6 kg per meter for a pipe with these specifications. For precise weight, refer to specific steel pipe weight charts or calculations based on actual wall thickness.
China is a large country to export steel pipe, if you want to buy steel pipe, you can import from China.
The weight of a 40mm diameter mild steel (MS) pipe would depend on its length and wall thickness. A general estimate for a 40mm MS pipe with a wall thickness of 3mm would be around 3.27 kilograms per meter.