you must use a wedge on the outside above the handle to see inside and then use a coat hanger or something long to pull the handle rod
Need to know if it is an inside or outside door handle.
with a screwdriver
you never gave me the answer.....
its the keyless entry
unbolt the mirror from the car and look inside the mirror for a bolt to tighten, don't remember if it can be tightened or not.
There is a door handle on the inside and the outside. Neither uses a tennis ball.
Remove the inside door panel of your 1994 Chevy Lumina. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
the handle is located inside the trunk near the lock mechanism
Assuming you are referring to the outer door handle, remove the inner door panel and look at the back of the handle. You will see a couple of steel rods attached to the handle, remove these(they just unclip)and move them out of your way. You should be able to see a couple of small nuts holding the handle to the door. Remove these and the handle can be pulled out of the door from the outside.
I need to replace my outside handle on the drivers door. Toyota told me to go on line to see a diagram. But, where? It is a 2000 camry.
Go to a junkyard and buy an entire door, they are fairly cheap.
Through the hole that the door handle comes through you can feel a screw. Remove the screw and the handle should come off.